131907
30
Zoom out
Zoom in
Vorherige Seite
1/62
Nächste Seite
GB 12
assembly (continued)
Mount the hood on the fixing supports in the hood with the
bolts supplied M5 x 12 (2x), screwing the bolts in loosely (3).
Fit the adjustment bolts supplied M8 x 16 (2x) into the
welded-on nuts in the hood (4).
Level the hood front to back using the adjustment bolts.
Tighten the bolts M5 x 12 (2x) in the fixing support in the
hood. Then tighten the bolts M5 x 12 (2x) that have already
been fitted in the top of the hood (5).
Make the plug connections in the hood.
WG7
assembling the connecting bar
Through the opening of the left filter holder and the round
hole on the side of the suspension module, push the
connecting bar that comes from the knob into the hole in the
coupling plate (1) and secure with the rapid-fix nut (2).
adjusting the valve
If the knob for controlling the valve is in the closed position,
the valve in the pipe should completely seal off the hole
horizontally. If this is not the case, the valve can be adjusted
to the horizontal by moving the bracket in the direction of the
arrow (3).
4
5
1
2
3
700000929100 WG3_4_7_8B 26-05-2003 10:26 Pagina GB 12
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ATAG wg 811 b wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info