1918
◆ Before its initial use, ensure the unit is
plugged in.
use
to turn the exhaust fan on
]
to regulate the exhaust level
]
to let the exhaust hood
]
run automatically
to turn off the exhaust hood
]
cleaning the grease filter
]
}
Press the on/off button 0/1 once.
}
Press buttons 2, 3, or 4 to increase the
exhaust level.
Setting 1 is the lowest exhaust level
and setting 4 the highest.
}
Start the automatic function by
pressing any of the exhaust level
buttons a second time.
}
Press the on/off button 0/1 a second
time.
}
Clean the grease filter if all the indicator
lamps start blinking simultaneously.
}
After cleaning the grease filter, press
button 2, 3, or 4.
}
The exhaust fan turns on a level 1.
}
The indicator lamp beside the on/off key
lights up.
}
The indicator lamp beside the button
pressed starts to blink. After ten
minutes, the exhaust hood turns off
automatically.
}
Pressing the button once turns the
exhaust fan on at the lowest level.
Pressing it again turns the exhaust fan
off. The indicator lamp beside the
button goes out.
}
The grease filter must be cleaned after
approximately 30 hours of use. The
unit's electronic memory keeps track of
the number of hours the unit has been
used.
}
The electronic memory is erased. (You
can only erase the memory once 30
hours of use has been registered.)