765266
31
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
VT TRUCK User guide
Page 29/31
Allow sufficient space around the charger for
ventilation when you use it to power or recharge
the tool's battery. Do not cover the charger with
objects liable to affect cooling. Do not use this
charger inside a bag.
Connect the charger to a suitable power outlet.
Do not use the charger if it is damaged or if its
power lead is damaged. Do not disassemble the
charger and do not modify any of its parts. Do not
attempt to repair the charger. It does not contain
any part that can be repaired. Replace the
charger if it has been damaged or exposed to
excess moisture.
Do not try to use it as a power source.
Unplug it before undertaking any cleaning or care.
About the battery
CAUTION: this device contains a Li-Po
battery. It can explode and release hazardous
chemicals. To reduce any risk of fire or burns, do
not disassemble, crush, pierce or dispose of the
battery or the tool in fire or water, and do not
short-circuit or short the contacts with a metal
object.
Always use the power supply approved by ATEQ
and supplied with the device.
The tool must be returned to the supplier for
replacement of the battery.
Opening the tool, modifying it or removing the
security tab voids the warranty completely.
Safety instructions for Li-Po battery use
The device must imperatively be placed on a non-
flammable surface during charging (ceramic tray
or metal box).
Only charge the Li-Po battery WITH the specific
charger provided.
If the battery begins to overheat to more than
60°C (140°F), STOP CHARGING IMMEDIATELY.
The battery must NEVER exceed 60°C (140°F)
during the charging process.
NEVER charge a battery pack immediately after
its use and while it is still hot. Let it cool down to
room temperature.
If you see any smoke or liquid coming out of the
battery, stop charging immediately. Disconnect
the battery from the charger and place the battery
in an isolated area for at least 15 minutes. STOP
USING THE BATTERY, and return the device to
your dealer.
Always keep a fire extinguisher for electrical fires
within reach while charging the battery. In the
unlikely event that the Li-Po battery catches fire,
DO NOT use water to extinguish the fire, use
sand or the extinguisher described above.
The parts of a Li-Po battery must be neutralised
out of use. The neutralisation procedure must be
carried out within very strict safety parameters.
You are recommended to contact a specialist in
this battery type to carry out this process. They
will have the out-of-use battery collected by a
specialised recycling organisation. Alternatively,
contact your dealer.
Do not dispose of Li-Po batteries with
household waste.
To prevent leakage or other hazards, do not store
batteries above 60°C (140°F). Never leave the
battery inside a car (for example) where the
temperature could be very high or in a place
where the temperature could exceed 60°C
(140°F). Store the battery in a dry place to avoid
all contact with any kind of liquid. Store the battery
only on a non-flammable surface that is heat
resistant and non-conductive, and away from any
flammable materials or sources.
A Li-Po battery must be stored with a minimum
charge of 30%. If you store the battery completely
discharged, it will quickly become unusable. If it
has to be stored for a long period (over 6 months),
remember to recharge it regularly (to more than
30%).
If you do not follow these safety instructions, you
risk causing serious damage to people or
property, and you even risk causing a fire!
The ATEQ company accepts no responsibility in
the event of damage arising as a result of non-
compliance with these safety instructions.
Since use of a Li-Po battery entails significant fire
risks capable of causing serious damage to
people and property, the user agrees to accept
the risks and the responsibility involved.
Since ATEQ cannot control correct use of the
battery (charging, discharging, storage, etc.), it
cannot be held responsible for damage caused to
people or property.
6. CE DECLARATIONS
DECLARATION OF CONFORMITY
The manufacturer of the ATEQ VT TRUCK
declares that this device complies with the
requirements of the following standards:
- ETSI EN 300 330 V2.1.1 (2017-02)
- ETSI EN 301 489-1/-3 V2.1.1 (2017-03)
- EN 61010-1:2010 (2014/35/EU)
- EN 62479:2010
- EN 61326-1:2013 (2014/30/EU)
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ateq VT Truck wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Ateq VT Truck

Ateq VT Truck Bedienungsanleitung - Deutsch - 38 seiten

Ateq VT Truck Bedienungsanleitung - Französisch - 34 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info