Bedienungsanleitung Atika AMF2500W (Seite 12 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

520112

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Before commissioning this product, read and keep to the

following advice. Also observe the preventive regulations of your

professional association and the safety provisions applicable in

the respective country, in order to protect yourself and others

from possible injury.

Pass the safety instructions on to all persons who work

with the machine.

Keep these safety instructions in a safe place.

Repair works on the shredder must be carried out by

the manufacturer or by companies appointed by the

manufacturer respectively.

 Make yourself familiar with the equipment before using it, by

reading and understanding the operating instructions.

 Do not use the machine for unsuitable purposes (see 'Normal

intended use' and 'Working with the garden shredder').

 Provide a safe standing position and keep at any time the

balance. Do not lean forward. When placing material into the

shredder, always stand on the same level as the machine.

When placing material into the shredder, always stand on the

same level as the machine.

 Be observant. Attend to what you do. Start working with ra-

tionality. Do not use the device when you are tired or under

the influence of drugs, alcohol or medicaments. One moment

of carelessness when using the device can result in serious

injuries.

 Wear protective goggles, gloves and noise protection while

working with the machine.

 Wear suitable work clothes:

- do not wear loose-fitting clothes

- slip-proof shoes

 Within his area of work the operator is responsible for third

parties.

 The machine must not be operated by children or young

people under 16 years of age.

 Physically, sensorially or mentally handicapped persons or

persons who have no relevant experience and/or knowledge

are not allowed to operate the device, unless a person

responsible for their safety supervises them or instruct them

on how to use the device.

 Children must be supervised to make sure that they do not

play with the device.

 Keep children away form machine.

 Never operate the machine if other persons are in the imme-

diate vicinity.

 Never leave the device unattended.

 Keep your workplace in an orderly condition! Untidiness

can result in accidents.

 Choose a working position alongside the equipment.

 Never reach into the filling or ejection opening.

 Keep your face and body away from the filling opening.

 Do not overload the machine! You work better and safer in the

given performance range.

 Only operate the machine with complete and correctly at-

tached safety equipment and do not alter anything on the

machine that could impair the safety.

 Do not alter the revolution speed of the motor, since this con-

trols the safe maximum operating speed, and protects the mo-

tor and all rotating parts against damage due to excess

speed.

 Do not operate without the funnel.

 Do not modify the device or parts of the device respectively.

 Close machine properly before enabling motor.

 Do not hose down the device with water. (Origin of danger

electric current).

 Take into consideration environmental influences:

− Do not use the device in moist or wet ambience.

− Do not leave the machine standing in the rain or use

when raining.

− Provide for good illumination.

 To prevent danger of injury to fingers during assembly or

cleaning operations wear protecting gloves.

 Switch the machine off and remove the mains plug from the

socket when

− Performing maintenance and cleaning work.

− Eliminating faults.

− Checking connecting lines, whether these are

knotted or damaged.

− Transporting.

− Carrying out repair work.

− Leaving unattended (even during short interruptions).

 If the machine’s filling funnel or ejection slot is blocked switch

off the motor and disconnect the mains plug before removing

material from the filling funnel or ejection slot.

 Check the machine for possible damage:

− Before further use of the machine the safety devices must

be checked carefully for their proper and intended func-

tion.

− Check whether movable parts function perfectly and do

not stick or whether parts are damaged. All parts must be

correctly installed and fulfil all conditions to ensure perfect

operation of the machine.

− Damaged safety devices and parts must be properly re-

paired or exchanged by a recognized, specialist workshop;

insofar as nothing else is stated in the instructions for use.

− Damaged or illegible safety labels have to be replaced.

 Store unused equipment in a dry, locked place out of the

reach of children.

 Design of the connection cable according to IEC 60 245 (H

07 RN-F) with a core cross-section of at least

− 1.5 mm

for cable lengths up to 25 m

− 2.5 mm

for cable lengths over 25 m

 Long and thin connection lines result in a potential drop. The

motor does not reach any longer its maximal power; the func-

tion of the device is reduced.

 Plugs and coupler outlets on connection cables must be made

of rubber, plasticised PVC or other thermoplastic material of

same mechanical stability or be covered with this material.

 The connector of the connection cable must be splash-proof.

 When running the connection line observe that it does not

interfere, is not squeezed, bended and the plug connection

does not get wet.

 Wind off completely the cable when using a cable drum.

Atika AMF2500W Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info