Bedienungsanleitung Atika ASP 5 N (Seite 11 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

520720

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

 Metal parts (nails, wire etc.) must be removed from logs

before splitting.

 Every other form of use is considered improper use. The

manufacturer accepts no liability for any damages resulting

from improper use, and any risk is in this case borne solely by

the user.

Even if used properly, residual risks can exist even if the

relevant safety regulations are complied with due to the design

determined by the intended purpose.

Residual risks can be minimised if the “Safety information” and

the “Intended usage” as well as the whole of the operating

instructions are observed.

Observing these instructions, and taking proper care, will reduce

the risk of personal injury or damage to the equipment.

 Failure to observe the safety precautions can lead to injury to

the operator or damage to property.

 Risk from electricity, by using non-standard electrical

connections.

 Touching live parts of opened electrical components.

 Risk of fire and slipping by leaking hydraulic fluid.

In addition, in spite of all the precautionary measures taken, non-

obvious residual risks can still exist.

Before commissioning this product, read and keep to

the following advice. Also observe the preventive regulations

of your professional association and the safety provisions

applicable in the respective country, in order to protect

yourself and others from possible injury.

Pass the safety instructions on to all persons who work

with the machine.

Keep these safety instructions in a safe place.

 Make yourself familiar with the equipment before using it, by

reading and understanding the operating instructions.

 Do not use the machine for unsuitable purposes (see “Normal

intended use” and “Working with the log splitter”).

 Ensure that you have stand in a secure standing position

and maintain your balance at all times.

 Take a working position, which is behind the slide of the

area of the operating lever. Never stand in the splitting

wedge’s zone.

 Never stand on top of the machine.

 Pay attention at all times. Take care with what you are doing,

and approach the work sensibly. Do not use the machine:

− when you are tired.

− under the influence of drugs, alcohol or medications that

may impair your powers of judgement.

 When working with the machine, always wear

− protective goggles or face mask

− safety gloves

− ear protection, if necessary

− safety shoes with steel toe-caps

 Wear suitable work clothing:

− do not wear any loose-fitting clothing or jewellery, since

these may be caught or trapped by moving parts

 Within his area of work the operator is responsible for third

parties.

 The machine may not be operated by children or young

people under the age of 18.

 Keep children away form machine.

 Never operate the machine if other persons are in the

immediate vicinity.

 Never leave the saw unattended.

 Keep your workplace in an orderly condition! Untidiness

can result in accidents.



Do not overload the machine! You work better and safer in

the given performance range.

 Only operate the machine with complete and correctly

attached safety equipment and do not alter anything on the

machine that could impair the safety.

 Faulty or damaged parts in the device must be replaced

immediately.

 Do not spray machine with water

(this is hazardous due to live components).

 Do not leave the machine standing in the rain or use when

raining.

 Store the unused machine in a dry locked place away from

the reach of children.

 Switch the machine off and remove the mains plug from the

socket when

− carrying out repair works

− carrying out servicing and repair works,

removal of faults

− Transporting

− leaving unattended (even during short interruptions)

 Check the machine for possible damage

− Before continuing to use the machine, the protective

devices must be inspected to ensure that they work

perfectly and with their intended function

− Check whether the parts are damaged. All parts must be

correctly installed and fulfil all conditions to ensure perfect

operation of the saw

− Damaged guards and parts must be properly repaired or

exchanged by a recognized, specialist workshop; insofar

as nothing else is stated in the instructions for use.

− Damaged or illegible safety warning labels should be

replaced immediately.

Electrical safety

 Electrical connections must conform to IEC 60245 (H 07

RN-F) with a cable cross-section of at least

⇒ 1.5 mm² for a maximum cable length of up to 10 m

 Never use the machine with a power supply cable of over 10

m in length. Longer power supply cables will cause a drop in

voltage. The motor will not be able to provide its maximum

performance and the operation of the machine will be

impaired.

 When laying the connecting attachments, be sure that they

do get crushed or bent, and that the plug-and-socket

connection does not get wet.

 Do not use the cable for purposes for which it is not meant.

Protect the cable against heat, oil and sharp edges. Do not

use the cable to pull the plug from the socket.

Atika ASP 5 N Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info