Bedienungsanleitung Atika BH 800 (Seite 12 von 104) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

555729

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

with the machine.

Keep these safety instructions in a safe place.

 Make yourself familiar with the equipment before using it, by

reading and understanding the original instructions.

 Be attentive. Be careful what you do. Behave sensibly when

working. Do not use the device when you are tired or under

the influence of drugs, alcohol or medicaments. One moment

of carelessness when using the device can result in serious

injuries.

 Do not use the device for purposes it is not intended for (see

“Intended use”).

 Familiarize yourself with your environment and pay attention

to possible dangers which you may not be able to hear

because of the motor noise.

 Within his area of work the operator is responsible for third

parties.

 Children and young persons under 16 years of age as well

as persons who have not read the instruction manual are not

allowed to operate this product.

 Physically, sensorially or mentally handicapped persons or

persons who have no relevant experience and/or knowledge

are not allowed to operate the device, unless a person

responsible for their safety supervises them or instruct them

on how to use the device.

 Children must be supervised to make sure that they do not

play with the device.

 Keep bystanders and animals away from your working area.

Do not allow other persons, especially children, to touch the

tool or cable.

 Switch off the machine if persons, in particular children or

pets, are close to you or if you change your working area.

 Never leave the device unattended.

 Wear protective clothing:

− safety goggles

− ear protection (Sound intensity level at workplace can

exceed 85 dB (A))

 Wear suitable work clothes:

− do not wear loose-fitting clothes or jewellery; they can

catch in moving parts.

− Solid shoes or boots with a nonskid sole

− Trousers to protect the legs

 Do not work with the device barfooted or only with thongs on

your feet.

 Take into consideration environmental influences:

− Do not use the device in moist or wet ambience.

− Do not expose the device to rain.

− Do not work directly near swimming pools or garden

ponds

− Do only work with sufficient visibility conditions. Provide

for good illumination.

− Do not operate the device when the ground is wet, if

possible.

 Before trimming, remove all foreign objects (e.g. stones,

branches, wires, etc.). While working watch out for further

foreign objects.

 If you come across to foreign objects, power off the device,

disconnect the mains plug and remove those foreign objects.

However before you restart the device, check it for possible

damages and have it repaired if necessary.

 Do not overload the device! You work better and safer in the

given performance range.

 Only operate the machine with complete and correctly

attached safety equipment (e.g. blade guard) and do not

alter anything on the machine that could impair the safety.

 Do not modify the device or parts of the device respectively.

 Before turning on the motor, make sure that your feet are at

a safe distance from the cutting tools.

 Never keep hands or feet close to or under rotating parts.

Keep away from the ejection slot.

 Pay attention to sure footing especially when working on

slopes or on wet ground and keep your balance at all times.

Guide the device only a walking speed.

 Do not work on steep slopes.

 When working on slopes, always work perpendicular to the

slope and never up and down.

 Be especially careful when changing the operating direction

on a slope.

 Observe the safety distance given by the handle bar.

 Always push the device forward while it is operating. Do not

pull it to yourself or behind you.

 While the motor is running, do not

− lift or carry the device about

 Caution! The tool runs after. Do not try to slow down the tool

by hand.

 Pay attention that the blade guard is attached.

 Turn off the device and wait until the drum has stopped when

− tilting the device

− crossing hard ground

− transporting the device to and from the work area

 Switch the machine off and remove the mains plug from the

socket when

− carrying out repair works

− maintenance and cleaning

− removing malfunctions and blockages

− transport and storage

− leaving unattended (even during short interruptions)

− when the device begins to exhibit unusual vibrations

− when you have hit an obstacle with the device.

 Do not wash down device with water. (origin of danger

electric current).

 Store unused equipment in a dry, locked place out of the

reach of children.

 Check the machine for possible damage:

− Before continuing to use the machine, the protective

devices must be inspected to ensure that they work

perfectly and with their intended function.

− Check whether movable parts function perfectly and do

not stick or whether parts are damaged. All parts must be

correctly installed and fulfil all conditions to ensure

perfect operation.

− Damaged guards and parts must be properly repaired or

exchanged by a recognized, specialist workshop; insofar

as nothing else is stated in the instructions for use.

− Damaged or illegible safety warning labels should be

replaced immediately.

 Maintain your device with care:

− Ensure that all nuts, bolts and screws are tight.

− Make sure that the ventilation apertures are free.

Atika BH 800 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Atika BH 800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info