Bedienungsanleitung Atika Bioplus 2400 (Seite 14 von 62) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

519868

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

 Risk of injury to the fingers and hands, when carrying out

assembly work and cleaning on the blade unit.

 Injury by the shredded material spinning away near the

hopper.

 Risk from electricity, by using non-standard electrical

connections.

 Touching live parts of opened electrical components.

 Impairment of hearing when working on the machine for

longer periods of time without ear protection.

In addition, in spite of all the precautionary measures taken, non-

obvious residual risks can still exist.

Before commissioning this product, read and keep to

the following advice. Also observe the preventive

regulations of your professional association and the safety

provisions applicable in the respective country, in order to

protect yourself and others from possible injury.

Pass the safety instructions on to all persons who work

with the machine.

Keep these safety instructions in a safe place.

Machine including safety cut-out

The safety cut-out, including an automatic motor brake,

which is attached to the shredder is used for the safety

of the machine, preventing the motor being started

when the machine is open and the rotating knives could

be reached by the operator’s hand.

Repairs on the safety cut-out must be done by the

producer or by a company designated by the

producer.

 Make yourself familiar with the equipment before using it, by

reading and understanding the operating instructions.

 Do not use the machine for unsuitable purposes (see 'Normal

intended use' and 'Working with the garden shredder').

 Ensure that you have stand in a secure standing position

and maintain your balance at all times. Do not lean forward

over the machine. When placing material into the shredder,

always stand on the same level as the machine.

 Be attentive. Be careful what you do. Behave sensibly

when working. Do not use the saw if you are tired.

 Wear protective goggles, gloves and noise protection while

working with the machine.

 Wear suitable work clothes!

− Do not wear loose-fitting clothes

− Slip-proof shoes

 Within his area of work the operator is responsible for third

parties.

 The machine must not be operated by children or young

people under 16 years of age.

 Keep children away form machine.

 Never operate the machine if other persons are in the

immediate vicinity.

 Never leave the saw unattended.

 Keep your workplace in an orderly condition! Untidiness

can result in accidents.

 Choose a working position alongside the equipment or

behind it. Never stand near the ejection opening.

 Never reach into the filling or ejection opening.

 Keep your face and body away from the filling opening.

 Do not overload the machine! You work better and safer in

the given performance range.

 Only operate the machine with complete and correctly

attached safety equipment and do not alter anything on the

machine that could impair the safety.

 Do not alter the revolution speed of the motor, since this

controls the safe maximum operating speed, and protects the

motor and all rotating parts against damage due to excess

speed.

 Do not operate without the funnel.

 Faulty or damaged parts in the device must be replaced

immediately.

 Close machine properly before enabling motor.

 Do not spray machine with water

(this is hazardous due to live components).

 Do not leave the machine standing in the rain

or use when

raining.

 Store the unused machine in a dry locked place away from

the reach of children.

 To prevent danger of injury to fingers during assembly or

cleaning operations hold the cutting mechanism (see. pic. p.

14) and wear protecting gloves.

 Switch the machine off and remove the mains plug from

the socket when

− carrying out repair works

− carrying out servicing and repair

works, removal of faults

− changing the blades

− Transporting

− leaving unattended (even during short interruptions)

 Check the machine for possible damage

− Before continuing to use the machine, the protective

devices must be inspected to ensure that they work

perfectly and with their intended function

− Check whether the parts are damaged. All parts must be

correctly installed and fulfil all conditions to ensure

perfect operation of the saw

− Damaged guards and parts must be properly repaired or

exchanged by a recognized, specialist workshop; insofar

as nothing else is stated in the instructions for use.

− Damaged or illegible safety warning labels should be

replaced immediately.

Electrical safety

 Design of the connection cable according to IEC 60245

(H 07 RN-F) with a core cross-profile section of at least

− 1.5 mm

for cable lengths up to 25m

− 2.5 mm

for cable lengths over 25m

 When laying the connecting attachments, be sure that they

do get crushed or bent, and that the plug-and-socket

connection does not get wet.

 Do not use the cable for purposes for which it is not meant.

Protect the cable against heat, oil and sharp edges. Do not

use the cable to pull the plug from the socket.

 Regularly check the extension cables and replace them if

they are damaged.

 Do not use any defective connection cables.

 When working outdoors, only use extension cables

especially approved and appropriately labelled for outdoor

use.

Atika Bioplus 2400 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info