Bedienungsanleitung Atika BMS250 (Seite 18 von 101) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Polnisch, Schwedisch)

519289

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

Contents

Declaration of conformity 5

Extent of delivery 17

Characteristics noise values 17

Symbols machine /operating instructions 17

Normal intended use 18

Residual risks 18

Security instructions 18

Assembly 20

Before the first commissioning 21

Commissioning 21

Adjusting the saw 22

Working instructions 23

Maintenance and care 24

Transport 25

Storage 25

Guarantee 25

Description of device / Spare parts 25

Possible faults 26

Technical data 27

Extent of delivery

• Circular saw BMS 250 including

− Power cable and plug

− TCT saw blade Ø 254 / 30 mm x 2,4; 24 teeth

− Folding frame

• Splitting wedge

• Safety guard with exhaust outlet

• Longitudinal stop

• Table length extension

• 2 supports for bench length extension

• 2 bench width extensions

• 2 transport wheels

• Pushstick

• Extraction hose

• screw bag

• 2 spanners for replacing saw blade

• Operating manual

 After unpacking, check the contents of the box

! That it is complete

! Check for possible transport damage

Report any damage or missing items to your dealer, supplier or

the manufacturer immediately. Complaints made at a later date

will not be acknowledged.

Characteristic data of noise

DIN EN ISO 3746 / DIN EN ISO 11202 / ISO 7960 Appendix A

Use of the machine as a bench to circular saw with standard

circular saw blade.

Noise power level

Sound pressure level at

the workplace

No-load L

= 102 dB(A) L

= 98 dB(A)

Load L

= 112,4 dB(A) L

= 102,5 dB(A)

The factor of measurement uncertainty is 4 dB.

The values given are emission values and must therefore not

simultaneously represent safe workplace values too. Although there is

a relationship between emission and immersion levels, it can be

reliably deduced whether additional precautionary measures are

necessary or not. Factors, which can influence the immersion level

currently existing at the workplace include the duration of the effects,

the special type of the workroom, other noise sources, etc. e.g. the

number of machines and other adjacent processes. The permissible

workplace values can also vary from country to country. This

information should however enable an improved assessment of the

danger and risk to be carried out.

Symbols machine

Carefully read

operator’s

manual

before

handling the

machine.

Shut off engine and

remove power cord

before performing

cleaning,

maintenance or

repair work.

Risk of

injuries of

fingers and

hands by the

saw blade

Do not expose to

rain. Protect

against humidity.

Wear eye and

ear protection

Wear dust mask.

Symbols Operating instructions

Threatened hazard or hazardous situation. Not

observing this instruction can lead to injuries or cause

damage to property.

Important information on proper handling of the

saw. Not observing this instruction can lead to faults

in the machine.



User information. This information helps you to use

all the functions of the chain saw optimally.

Assembly, operation and servicing. Here you are

explained exactly what to do.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atika BMS250 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info