519915
13
Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
12
Do not operate machine before having read the
operating instructions, understood all the notes and
assembly the machine as described here.
Keep the instructions in a safe place for future use.
Contents
Declaration of conformity 12
Extent of delivery 12
Characteristics noise values 12
Operating times 12
Symbols machine 12
Symbols operating instructions 13
Normal intended use 13
Risidual risks 13
Safety working 13
Before the first start-up 14
Start-up 15
Working with the saw 16
Maintenance and cleaning 18
- Changing the saw blade 18
- Replacing the table insert 18
Transport 19
Storage 19
Guarantee 19
Possible faults 19
Technical data 20
Description of device / spare parts 20
EC Declaration of Conformity
according to EC directive 2006/42/EC
We,
ATIKA GmbH & Co. KG
Schinkelstraße 97
59227 Ahlen - Germany
herewith declare under our sole responsibility that the product
Baukreissäge (construction circular saw) BTK 400, BTK 450, BTK 500
BTH 400, BTH 450, BTH 500
Serial number: see last page
is conform with the above mentioned EC directives as well as with the
provisions of the guidelines below:
2004/108/EC, 2000/14/EC and 2006/95/EC
Following harmonized standards have been applied:
EN 60204-1:2006; EN 1870-1:2007+A1:2009; EN 55014-1:2006;
EN 55014-2:1997+A1; EN 61000-3-2:2006: EN 61000-3-11:2000
Conformity assessment procedure: 2000/14/EC - Appendix V
Measured level of the acoustic output L
WA
= 109,6 dB(A)
Guaranteed level of the acoustic output L
WA
= 110 dB(A)
EC type examination carried out by :
Fachausschuss Holz – Vollmoellerstraße 11 – 70563 Stuttgart – Nr.: 0392
Certificate no.: HO 101117
Keeping of technical documents at:
ATIKA GmbH & Co. KG – Technical department – Schinkelstr. 97
59227 Ahlen – Germany
Ahlen, 21.05.2010 A. Pollmeier, management
Extent of delivery
1 Construction circular saw
1 Parallel limit stop
1 Pushstick
Assembly accessories for saw blade change
Operating manual
Check the machine for:
¾ That it is complete
¾ Check for possible transport damage
Report any damage or missing items to your dealer, supplier or the
manufacturer immediately. Complaints made at a later date will not be
acknowledged.
Characteristics noise values
EN ISO 3744:1995 / EN ISO 11202:1995/AC:1997 /
ISO 7960:1995 Appendix A, A.2 b)
Application of the machine as construction circular saw with standard saw
blade.
Guaranteed sound power level
L
WA
= 114 dB(A)
Sound pressure level at the workplace No-load L
PA
= 92.8 dB(A)
Load L
PA
= 98.5 dB(A)
The factor of measurement uncertainty is K = 4 dB.
The values given are emission values and must therefore not simultaneously
represent safe workplace values too. Although there is a relationship between
emission and immersion levels, it can be reliably deduced whether additional
precautionary measures are necessary or not. Factors, which can influence the
immersion level currently existing at the workplace include the duration of the
effects, the special type of the workroom, other noise sources, etc. e.g. the
number of machines and other adjacent processes. The permissible workplace
values can also vary from country to country. This information should however
enable an improved assessment of the danger and risk to be carried out.
Operating times
Before initiating the device please observe the provisions pertaining to
corresponding laws (regional provisions) for the noise control.
Symbols machine
Carefully read opera-
tor’s manual and the
safety instructions be-
fore starting the machine
and observe the
instructions when
operating.
Shut off engine and
remove power cord
before performing
cleaning, maintenance or
repair work.
Wear ear protection!
Electrical devices do not go into the domestic rubbish. Give
devices, accessories and packaging to an eco-friendly recycling.
According to the European Directive 2002/96/EC on electrical
and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a facility
for an environmentally compatible recycling.
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Atika BTH wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info