520775

Atika BTU450 Seite 13

13
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
12
Symbols operating instructions
Threatened hazard or hazardous situation. Not observing this
instruction can lead to injuries or cause damage to property.
L
Important information on proper handling. Not observing this
instruction can lead to faults.
User information. This information helps you to use all the
functions optimally.
Assembly, operation and servicing. Here you are explained
exactly what to do.
Normal intended use
This construction circular saw is exclusively designed for lengthwise and
cross cutting of solid wood and plate material such as chipboard, wood
core plywood and MDF plates with square or rectangular cross section
and a thickness of max. 150mm in the open outside of enclosed areas
using carbide tipped circular saw blades acc. to EN 847-1. The saw blade
diameter must be between 445 and 450 mm.
Cross cuts may only be performed in conjunction with a mounted cross-
cutting fence.
Only materials that can be safely placed are allowed to be cut.
The use of saw blades made of HSS steel (high-alloy high speed steel) is
not permitted since this steel is hard and brittle. Risk of injury through saw
blade breakage and expulsion of saw blade pieces.
Normal intended use also includes the observance of the manufacturer's
operating, maintenance and repair conditions, as well as strict adherence
to the safety inspections listed in the instructions.
The relevant accident prevention regulations for the operation as well as
the other generally acknowledged occupational medicine and safety rules
must be complied with.
Any other use does not conform with the normal intended use of the
circular saw bench. The manufacturer is not liable for any resulting
damage; the user bears all risks!
Unauthorized modifications to the saw preclude any liability of the
manufacturer for resulting damages of any kind.
The saw may only be equipped, used and serviced by persons who are
familiar with it and have been instructed on the hazards. Repair works
may only be carried out by us or by a customer service agent nominated
by us.
This machine must not be used in potential explosive atmospheres.
Metallic parts (wires etc.) have unconditionally to be removed from the
material to be cut.
Risidual risks
Even if used properly, residual risks can exist even if the relevant safety
regulations are complied with due to the design determined by the intended
purpose.
Residual risks can be minimised if the “Safety instructions” and the “Normal
intended use” as well as the whole of the operating instructions are observed.
Observing these instructions, and taking proper care, will reduce the risk of
personal injury or damage to the equipment.
Danger of injury of fingers and hands by the tool (saw blade) or
work piece. Therefore, wear gloves (e.g. when replacing the saw blade).
Risk of injury when removing chips while the saw blade still rotates.
Only remove chips after the saw blade and the saw unit (motor) has
come to a standstill.
Injury by catapulted workpiece parts.
Throwback of the workpiece or workpiece parts.
Breaking or catapulting of saw blade.
Only operate the saw with complete and correctly attached safety
equipment and do not alter anything on the machine that could impair the
safety.
Emission of harmful wood dusts. Therefore, wear a dust mask.
Risk from electricity, by using non-standard electrical connections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for longer periods of
time without ear protection.
In addition, in spite of all the precautionary measures taken, non-obvious
residual risks can still exist.
Safe working
Woodworking machines can be dangerous if not used properly. If
electrical tools are used, the fundamental safety precautions must be
met to preclude the risks of fire, electric shock and injuries to persons.
Before starting this device, read and keep to the following advice. Also
observe the preventive regulations of your professional association and
the safety provisions applicable in the respective country, in order to
protect yourself and others from possible injury.
L
Pass the safety instructions on to all persons who work with the
machine.
L
Keep these safety instructions in a safe place.
Make yourself familiar with the equipment before using it, by
reading and understanding the operating instructions.
Be attentive. Be careful what you do. Behave sensibly when
working. Do not use the device when you are tired or under the
influence of drugs, alcohol or medicaments. One moment of care-
lessness when using the device can result in serious injuries.
Avoid abnormal posture. Provide a safe standing position and keep at
any time the balance. Do not lean forward.
Wear suitable work clothes:
− do not wear loose-fitting clothes or jewellery; they can catch in
moving parts.
− slip-proof shoes
− hairnet in case of long hair
Wear personal protective equipment:
− ear protection (Sound intensity level at workplace can exceed 85 dB
(A))
− safety goggles
− gloves when you replacing the saw blade
ONLY OPERATE the circular saw on a
− solid
− level
− slip-free
− vibration free surface
When the saw is connected to a chip exhaustor:
− Required air flow rate: 1150 m³/h,
negative pressure on the suction nozzle 1160 Pa at an air velocity of 20
m/s.
− Start the chip exhaustor before starting the machining.
Keep your workplace in an orderly condition! Untidiness can result in
accidents.
Take into consideration environmental influences:
− Do not expose the saw to rain.
− Do not use the saw in moist or wet ambience.
− Provide for good illumination.
− Do not use this saw near inflammable liquids or gases.
Never leave the saw unattended.
Adhere to national regulations that might specify an age limit for the user
of the unit.
Keep other persons away.
The operator is responsible for other people within the working area.
Do not allow other persons, especially children, to touch the tool or the
cable.
Keep them away from your working area.
Always stand to the side of the danger zone (saw blade) when working at
the bench.
Start cutting only when the saw blade has reached its required speed.
… 13 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

atika-btu450

Suche zurücksetzen

  • wie baue ich das sägeblatt vom typ atika btu 450 aus Eingereicht am 31-12-2021 17:23

    Antworten Frage melden

  • Meinen die das ernst,diese kümmerlichen Tischverlängerungsbefestigung samt der instabilen Verlängerungstafel? Eingereicht am 29-6-2018 21:09

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Atika BTU450 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info