Bedienungsanleitung Atika DK400 (Seite 17 von 99) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch)

520782

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

Residual risks

Even if used properly, residual risks can exist even if the

relevant safety regulations are complied with due to the design

determined by the intended purpose.

Residual risks can be minimised if the “Safety information” and

the “Intended usage” as well as the whole of the operating

instructions are observed.

Observing these instructions, and taking proper care, will reduce

the risk of personal injury or damage to the equipment.

 Risk of injury to fingers and hands caused by the tool (saw

blade) or workpiece (e.g. when changing the saw blade).

 Injury from parts of the workpiece spinning off.

 Throwback of the workpiece or workpiece parts.

 Breakage and spinning off from the saw blade.

 Risk from electricity, by using non-standard electrical

connections.

 Touching live parts of opened electrical components.

 Impairment of hearing when working on the machine for

longer periods of time without ear protection.

 Emission of harmful timber dust when operating without

exhaust suction.

In addition, in spite of all the precautionary measures taken,

non-obvious residual risks can still exist.

Safe working

Woodworking machines can be dangerous if not used

properly. If electrical tools are used, the fundamental safety

precautions must be met to preclude the risks of fire,

electric shock and injuries to persons.

Before commissioning this product, read and keep to the

following advice. Also observe the preventive regulations of

your professional association and the safety provisions

applicable in the respective country, in order to protect

yourself and others from possible injury.

Pass the safety instructions on to all persons who work

with the machine.

Keep these safety instructions in a safe place.

 Make yourself familiar with the equipment before using it, by

reading and understanding the operating instructions.

 Do not use the machine for unsuitable purposes (see

“Normal intended use” and “Working with the vacuum

cleaner”).

 Avoid abnormal posture. Provide a safe standing position

and keep at any time the balance.

 Be observant. Attend to what you do. Start working with

rationality. Do not use the device when you are tired or under

the influence of drugs, alcohol or medicaments. One moment

of carelessness when using the device can result in serious

injuries.

 Wear suitable work clothes:

− do not wear loose-fitting clothes or jewellery; they can

catch in moving parts.

− slip-proof shoes

− wear a hair-net if your hair is long

 Wear protective clothing:

− ear protection (Sound intensity level at workplace can

exceed 85 dB (A))

− safety goggles

− breathing mask when carrying out works that produce a

lot of dust

 Operate the saw only on

− firm

− level

− slip-free

− vibration free surface

 Keep your workplace in an orderly condition! Untidiness

can result in accidents.

 Take into consideration environmental influences:

− Do not expose the saw to rain.

− Do not use the saw in a damp or wet environment.

− Ensure that the workplace is well lit.

− Do not use the saw near to flammable liquids or gases.

− The timber dust created while operating the machine

impairs the visibility required and is partially damaging

to health. Use the connection of the dust extraction and

make sure that this is properly connected and used.

 Never leave the saw

unattended.

 Persons under 18 years shall not operate the saw. An

exception is youngsters under the age of 16 within the

scope of their vocational training under supervision.

 Keep other persons away.

Do not allow other persons, especially children, to touch

the tool or cable.

 Keep them away from your working area.

 Do not overload the machine! You work better and safer in

the given performance range.

 Only operate the machine with complete and correctly

attached safety equipment and do not alter anything on the

machine that could impair the safety.

 Do not used cracked saw blades or those that have

changed shape.

 Only use well sharpened saw blades, as blunt saw blades

not only increase the risk of throw-back errors, but also

load the motor.

 Insert the saw blade always in that way that the teeth face

downwards. Clamp the saw blade so hard that it can not

break.

 Take the correct working posture. The saw teeth must face

the operator.

 Do not use any saw blades which do not correspond to the

indicated characteristics of this instruction manual.

The use of other tools and other accessories can

signify a risk of injury for you.

 The saw blade protection shall always be used. It has to be

positioned in the way that the saw blade is covered

completely except for the part necessary for the work piece

machining.

 Provide that pieces cut off are not caught by the saw blade

and thrown away.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atika DK400 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info