Bedienungsanleitung Atika DKV400 (Seite 18 von 99) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch)

520783

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

 Do not remove splinters, chips and waste from the

hazardous area of the saw blade by hand.

 Push the work piece always hard to the work top. But avoid

cramped hand guidance since slipping off of the hand would

directly lead into the saw blade.

 When cutting smaller work pieces use suitable auxiliary

means to prevent injuries.

 When cutting logs, use a special device, which secures

the workpiece on both sides of the saw blade against

turning.

 Switch the machine off and remove the mains plug from

the socket when

− carrying out repair works

− carrying out servicing and repair works, removal of faults

(this also includes removing clamped splinters)

− Transporting the saw

− Changing the saw blade

− leaving the saw unattended (even during short

interruptions)

 Look after your saw with care:

− Keep the tools sharp and clean to be able to work better

and more safely.

− Follow the servicing instructions and the information

about changing tools.

− Keep handles dry and free of oils and grease.

 Check the machine for possible damage:

− Before continuing to use the machine, the protective

devices must be inspected to ensure that they work

perfectly and with their intended function

− Check whether the movable parts function perfectly and

do not stick or whether the parts are damaged, All parts

must be correctly installed and fulfil all conditions to

ensure perfect operation of the saw

− Damaged guards and parts must be properly repaired or

exchanged by a recognized, specialist workshop; insofar

as nothing else is stated in the instructions for use.

− Damaged or illegible safety warning labels should be

replaced immediately.

 Do not allow any tool key to be plugged in!

 Store the unused machine in a dry locked place away from

the reach of children.

Electrical safety

 Execution of the connecting line with a cross section of at

least 1 mm² .

 Protect yourself against an electric shock. Avoid touching

earthed parts with your body.

 Do not use the cable for purposes for which it is not meant.

Protect the cable against heat, oil and sharp edges. Do

not use the cable to pull the plug from the socket.

 Regularly check the saw cable and if damaged, have it

renewed by a recognised skilled electrician.

 When taking the connecting line take care that it does not

disturb, is not squeezed, bended and the connection

assembly does not get wet.

 Regularly check the extension cables and replace them if

they are damaged.

 Do not use any defective connection cables.

 When working outdoors, only use extension cables

especially approved and appropriately labelled for outdoor

use.

 Do not set up any provisional electrical connections.

 Never bypass protective devices or deactivate them.

 Schließen Sie das Gerät über Fehlerstromschutz-schalter

(30 mA) an.

The electrical connection or repairs to electrical parts of

the machine must be carried out by a certified electrician or

one of our customer service points. Local regulations –

especially regarding protective measures – must be

observed.

Repairs to other parts of the machine must be carried out

by the manufacturer or one of his customer service points.

Use only original spare parts, accessories and special

accessory parts. Accidents can arise for the user through

the use of other spare parts. The manufacturer is not

liable for any damage or injury resulting from such action.

Preparing for commissioning

To achieve perfect function of the machine, follow the

notes given in these instructions

You have to attach the following parts:

 Sawdust blow-off device, page 3 (fig. C, D)

 Saw blade protection, page 3 (fig. D,E)

Assembly of the sawdust blow-off device

1. Put the mounting (12) into the guidance (fig. C)

2. Put the blow-off tube (14) on the connecting piece (16).

3. Insert the blow-off nozzle (15) down into the mounting (12)

and put on the extraction tube.

4. With the clamping screw (13) the mounting (12) can be

fixed in different heights (fig. D).

5. By the screw (19) the blow-off nozzle (15) is adjusted

variably to blow off the sawdust from the cutting gap when

sawing.

 Assembly of the saw blade protection on the

sawdust blow-off device

1. Push the saw blade protection (8) on the mounting (12)

(fig. D).

2. Push screw (20) through the borehole of the mounting and

the saw blade protection and lock with the screw nut (21)

(fig. E).

 Assembly of the saw on a work bench

There are contained four rubber feet in the scope of delivery.

They are affixed down on the saw. Therefore, put the rubber feet

into the intended boreholes. Like this, the saw can be

assembled without additional safety.

But it can also be assembled fixed on a workbench to prevent

vibrations and noise when sawing. The small parts required for

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atika DKV400 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info