Bedienungsanleitung Atika KS2201 (Seite 25 von 179) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

475726

Zoom out

Zoom in

Vorherige Seite

1/179

Nächste Seite

Maintenance and cleaning

Before each maintenance and cleaning

work

− switch off device

− wait for stop of chain saw

− pull out main plug

Further maintenance and cleaning works than described in

this chapter shall only be carried out by the manufacturer or

companies named by the manufacturer.

For maintaining and cleaning, removed security devices

must unconditionally be mounted properly and proved

again.

Use only original parts. Other parts can result in

unexpected damages and injuries.

Maintenance

In order to aviod possible injuries wear gloves.

To guarantee a long and reliable usage of the chain saws

carry out the following maintainance works regularly.

Check the chain saw for obvious defects such as

− loose, hung out or damaged saw chain

− loose fastenings

− worn or damaged components

Check the chain saw after each application for

− wear, especially chain, sword and chain wheel.

− correctly assembled and faultless covers and protective

devices.

Necessary repair works or maintainance works have to be

carried out before the usage of the chain saw.

Sharpening of saw chain

For sharpening a saw chain some expertise is necessary.

The saw chain must be regrinded in a specialised shop.

You can also sharpen your saw chain yourself by using our

electric sharpener KSG 220 (article-no.: 302360).

You can only work safely and well with a sharp and

clean saw chain.

Exchanging saw chain and sword

Saw chain and sword are exposed to great wearing

demands. Immediately exchange saw chain and sword

when the faultless function is not guaranteed.

B Put the chain saw with motor downward on an even

face.

B Remove the cover (10) by loosening the fastening

screw (11). 1

B Turn the chain clamper (22) anti-clockwise in order to

release the saw chain a bit. 3

B Take off the sword with saw chain.

B Clean the guide slot thouroughly when only the saw

chain is exchanged.

B When assembling, pay attention that the chain links are

lying correctly within the guide slot and on the chain

wheel (13). 4

B Turn the chain clamp (22) clockwise until the saw chain

is clamped.

B Now, refasten the cover (10).

B Clamp the saw chain as described in paragraph

„Clamping of saw chain“.

Chain wheel

The demand of the chain wheel (13) is particularly great.

Check regularly the teeth of the chain wheel for wear or

damages.

A worn or damaged chain wheel reduces the durability of

the saw chain and should therefore immediately be

exchanged by the customer service.

Checking of the oil automatic

Check the function of the automatic chain lubrication by

switching on the chain saw and holding it with the pike in

direction of a carton or paper on the ground.

Do not get in contact with the ground with the chain.

Keep a safe distance of 20 cm.

If an increasing oil track is caused when checking it the oil

automatic works faultless.

If there is no oil track despite full oil tank

B clean the oil flow canal (14) and the upper chain

clamping boring (15). 23

B If this is not successful please contact the customer

service.

Cleaning

Clean the chain saw thouroughly after each application so

that the faultless function is kept.

B Clean the case with a soft brush or a dry cloth.

Water, solvents and polishing agents shall not be

applied.

B Pay attention to that the ventilation slots for the motor

cooling are free (risk of overheating).

B After a lomger application period (1 – 3 hours)

disassemble the cover, the sword and the chain and

clean them with a brush. 24

B In case of harder pollution or resins put the chain for

some hours in a container with chain cleaner.

Afterwards wash up the chain with clear water.

B Remove all adhering substances with a brush from the

chain wheel and the sword fastening.

B Clean the oil flow canal with a clean cloth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atika KS2201 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info