Bedienungsanleitung Atika KSG220A (Seite 14 von 108) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch, Schwedisch, Finnisch)

520146

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

The electrical connection or repairs to electrical parts

of the machine must be carried out by a certified

electrician or one of our customer service points. Local

regulations – especially regarding protective measures –

must be observed.

Repairs to other parts of the machine must be carried

out by the manufacturer or one of his customer service

points.

Use only original spare parts, accessories and special

accessory parts. Accidents can arise for the user through

the use of other spare parts. The manufacturer is not

liable for any damage or injury resulting from such action.

Preparing for commissioning

To achieve perfect function of the machine, follow the

notes given in these instructions

You must still do the following:

 Mount the rotary table

 Set up the device securely

Assembling the rotary table

1. Place the rotary table (1) onto the supporting table (2).

Thread the mounting nut (7) on the locking screw.

Mounting the chain sharpener on a workbench

For secure handling, the device must be mounted along

the edge of a workbench or table. Use all three fixing points if

possible. But make sure that the recess for the saw chain

remains free and the locking nut remains accessible.

Hint: We recommend the additional placement of a rubber pad

to reduce noise and vibration (not included in scope of

delivery).

The small parts required for mounting are not included in the

scope of delivery. Use the following for this purpose:

Position Description

1. Hexagonal screw M 8

2. Washer Ø 8mm

3. Hexagon nut M 8, self-locking

 Place the device at a location that meets the following

conditions:

− secured against slipping

− free of vibrations

− even

− clean and dry

− free of tripping hazards

− adequate light

Commissioning

Mains connection

Compare the voltage listed on the device type plate, e.g.

230 V, with the mains voltage and connect the chain

sharpener to the corresponding and properly grounded socket.

Alternating current motor: Use a shockproof plug, mains

voltage 230 V with residual current circuit breaker and 10

A inert fuses.

 Use connection cable or extension cable respectively with

a cross section of at least 1,5 mm².

Switching on

Do not use any device where the switch can not be

switched on and off. Damaged switches must be repaired

or replaced immediately by the customer service.

Press “I” of the ON-OFF switch.

Switching off

To turn off the device, press “0” of the ON-OFF switch.

Working instructions

Before commencing work, ensure the following:

 Workplace tidied?

 Has the chain sharpener been permanently mounted on a

workbench?

 You may not start to operate the machine until you have

read these operating instructions, observed all the

instructions given and installed the machine as described!

Working with the chain sharpener

The protective cover (20) must cover the grinding

wheel as much as possible.

For this loosen the two screw caps (14) and adjust the

protective cover appropriately.

Always keep your hands at a safe distance to the

rotating grinding wheel.

 Use the factory-installed grinding wheel only to sharpen

chains used in hobby applications (1/4, 3/8 hobby and

0.325 chains). (An optional grinding wheel

100 x 4.5 x 10 mm, item no. 363718, is available for

professional cutting chains.

 Do not use any damaged grinding wheels or such that

have changed their shape.

 Start working only after the grinding wheel has reached its

maximum speed.

 Only chains may be worked that can be put down and

guided securely.

Ensure that you always comply with the safety

instructions given on p. 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atika KSG220A Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info