Bedienungsanleitung Atika T 250 N (Seite 16 von 164) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch, Türkisch)

520788

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

 The relevant accident prevention regulations for the

operation as well as the other generally acknowledged

occupational medicine and safety rules must be complied

with.

 Any other use is deemed not to be use as prescribed. The

manufacturer is not liable for any type of damage resulting

from this: the user bears the sole risk.

 Independently made alterations to the circular saw preclude

any liability of the manufacturer for resulting damages of

any kind.

 The circular saw may only be equipped, used and

serviced by persons who are familiar with these and have

been instructed in the hazards. Repair works may only be

carried out by us or by a customer service agent nominated

by us.

 The machine may not be used in a potentially explosive

environment or be exposed to the rain.

 Metal parts (nails, etc.) must be removed from the timber to

be sawn.

Even if used properly, residual risks can exist even if the

relevant safety regulations are complied with due to the design

determined by the intended purpose.

Residual risks can be minimised if the “Safety information” and

the “Intended usage” as well as the whole of the operating

instructions are observed.

Observing these instructions, and taking proper care, will

reduce the risk of personal injury or damage to the equipment.

 Danger of injury of fingers and hands by the tool (saw

blade) or work piece, e.g. when replacing the saw blade.

 Injury from parts of the workpiece spinning off.

 Throwback of the workpiece or workpiece parts.

 Breakage and expulsion of saw blade.

 Risk from electricity, by using non-standard electrical

connections.

 Touching live parts of opened electrical components.

 Impairment of hearing when working on the machine for

longer periods of time without ear protection.

 Emission of harmful timber dust when operating without

exhaust suction.

In addition, in spite of all the precautionary measures taken,

non-obvious residual risks can still exist.

Wood processing machines can be dangerous when

used improperly. The use of electrical tools requires the

observation of basic safety precautions to eliminate risk of

fire, electrical shock and personal injuries.

Before commissioning this product, read and keep to the

following advice. Also observe the preventive regulations

of your professional association and the safety provisions

applicable in the respective country, in order to protect

yourself and others from possible injury.

Pass the safety instructions on to all persons who work

with the machine.

Keep these safety instructions in a safe place.

 Make yourself familiar with the equipment before using

it, by reading and understanding the operating

instructions.

 Be observant. Attend to what you do. Start working with

rationality. Do not use the device when you are tired or

under the influence of drugs, alcohol or medicaments.

One moment of carelessness when using the device

can result in serious injuries.

 Avoid unusual posture. Provide a safe standing position

and keep at any time the balance. Do not lean forward.

 Wear suitable work clothes:

− do not wear loose-fitting clothes or jewellery; they can

catch in moving parts.

− slip-proof shoes

− wear a hair-net if your hair is long

 Wear protective clothing:

− ear protection (sound pressure levels at the workplace

usually exceed 85 dB(A)

− safety goggles

− Dust mask with work activities generating dust

− Gloves when replacing the saw blade

 Only operate the circular saw on a

− solid

− level

− slip-free

− vibration free surface

 Keep your workplace in an orderly condition! Untidiness

can result in accidents.

 Take into consideration environmental influences:

− Do not expose the saw to rain.

− Do not use the saw in a damp or wet environment.

− Provide for good illumination.

− Do not use the saw near to flammable liquids or

gases.

−

The wood dust generated during operation impedes the

necessary view and is harmful to health to some degree.

If the machine is not used in the open air, a shavings

exhausts must be attached to both exhaust outlets

(e.g. small transportable dust remover).

 Never leave the saw unattended.

 Persons under the age of 18 must not operate the circular

saw. An exception is youngsters under the age of 16

within the scope of their vocational training under

supervision.

 Keep other persons away.

Do not allow other persons, especially children, to touch

the tool or cable.

Keep them away from your working area.

 Take up a working position, in which you are always to the

side of the saw blade outside of the cutting level.

 If a second person is working at the saw with you, that

person must stand at the opposite end of the bench length

extension.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atika T 250 N Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info