Bedienungsanleitung Atika TopLine 2500 (Seite 14 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

519880

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

 Switch the machine off and remove the mains plug

from the socket when

− carrying out repair works

− carrying out servicing and repair works, removal

of faults

− changing the blades

− Transporting

− leaving unattended (even during short

interruptions)

 Check the machine for possible damage

−

Before continuing to use the machine, the

protective devices must be inspected to ensure

that they work perfectly and with their intended

function

−

Check whether the parts are damaged. All parts

must be correctly installed and fulfil all conditions

to ensure perfect operation of the saw

−

Damaged guards and parts must be properly

repaired or exchanged by a recognized, specialist

workshop; insofar as nothing else is stated in the

instructions for use.

−

Damaged or illegible safety warning labels

should be replaced immediately.

Electrical safety

 Design of the connection cable according to IEC

60245 (H 07 RN-F) with a core cross-profile section

of at least

−

1.5 mm

for cable lengths up to 25m

−

2.5 mm

for cable lengths over 25m

 When laying the connecting attachments, be sure

that they do get crushed or bent, and that the plug-

and-socket connection does not get wet.

 Do not use the cable for purposes for which it is not

meant. Protect the cable against heat, oil and

sharp edges. Do not use the cable to pull the plug

from the socket.

 Regularly check the extension cables and replace

them if they are damaged

 Do not use any defective connection cables

 When working outdoors, only use extension cables

especially approved and appropriately labelled for

outdoor use

 Do not set up any provisional electrical

connections

 Never bypass protective devices or deactivate

them.

The electrical connection or repairs to electrical

parts of the machine must be carried out by a

certified electrician or one of our customer service

points. Local regulations – especially regarding

protective measures – must be observed.

Repairs to other parts of the machine must be

carried out by the manufacturer or one of his

customer service points.

Use only original spare parts and accessories.

Accidents can arise for the user through the use of

other spare parts. The manufacturer is not liable

for any damage or injury resulting from such action.

 Check that the machine is completely and correctly

assembled.

 To avoid toppling, place the chopper on a firm

horizontal surface.

 Do not place the equipment on ground which is

paved or surfaced with gravel.

 The machine should only be operated in the open.

Always maintain a safe distance (at least 2 m)

from walls or other fixed objects.

 Before using the shredder, make sure each time

that

−

there are no faulty connections (tears, cuts, etc.)

−

there are no damage at the machine

−

all screws are tight

L Mains connection

 Compare the voltage given on the machine model

plate e.g. 230 V with the mains voltage and connect

the machine to the relevant and properly earthed

plug.

 Only use connection cables with sufficient

diameters

 Fuse protection

only UK / Switzerland

2000 W 16 A

13 A inert

2400 W 16 A inert

13 A inert

2500 W 16 A inert

13 A inert

Electrical mains supply impedance

When conditions in the electrical mains supply are un-

favourable, voltage reductions for short periods can

occur during the process of turning on the equipment,

which can adversely affect other equipment (e.g., the

flickering of a lamp).

No breakdowns are to be expected if the maximum,

electrical mains supply impedances given in the table

are met.

Power consumption P

(watts)

Electrical mains supply

impedance Z

max

(

Ω

)

2000 0,25

2400 - 2500 0,24

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atika TopLine 2500 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info