Bedienungsanleitung Atika VT36 (Seite 16 von 119) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

475732

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

Switching on Â

¨ Tilt the scarifier slightly towards you so that the front wheel

are above the ground.

Push the safety button (11) and keep it depressed.

Next, pull the switch lever (12) toward the handle hoop.

The scarifier starts and the scarifier drum can rotate freely.

¨ Now release the safety button (11).

Switching off

When you release the switch lever (12) it returns automatically

to its original position.

Motor protection

The motor is equipped with a protective circuit breaker and

switches off automatically in case of overloading. After a

cooling-down break (approx. 15 min), the motor may be

restarted.

Release the switch lever (12) because the device will

otherwise restart immediately after it has cooled down.

Risk of injury!

Setting the work depth

Before settings the work depth:

− switch off device

− wait until the drum is stationary

Adjust the work depth by

pressing the adjusting knob (13)

and simultaneously turning it to your desired position.

Position Work depth

1 -5 mm

2 -2,5 mm

3 1,5 mm

4 4 mm

5 7 mm

6 10 mm

L Set the work depth according to the grass and ground

conditions at both running wheels.

Recommended work depths:

Position

Regularly scarified soft ground; without stones 5 / 6

Seldom scarified mossy ground; with stones 3 / 4

Uncultivated very mossy; with stones 1 / 2

Set a lower work depth when the motor is straining

(motor speed drops and motor noise changes).

Example: Work depth set to 5 Î change to 4

Working instructions

Before commencing work, ensure the following:

 You may not start to operate the machine until you have

read these operating instructions, observed all the

instructions given and installed the machine as described!

 Provide for a safe and cleaned workplace. Remove from the

working area objects which might be thrown off.

 Before starting your work make sure that:

− the tools and bolts are not worn or damaged. To avoid

any unbalance worn or damaged tools and bolts must

only be replaced as a whole set.

− drum and blades are in proper condition

− all screw connections are tight

− no other persons or animals stay within the working area,

− you can always step back without any barriers,

− you have always a secure standing position.

Always keep your hands and feet at a safe distance to

the rotating tool.

Vibration

If persons who have blood circulation problems are too

often exposed to vibrations damages to the nervous system or

to blood vessels may occur.

You can reduce vibrations

− by thick and warm working gloves,

− shorter working time (have longer breaks).

See a doctor if your fingers swell, you don’t feel well or your

fingers become numb.

Working with the scarifier

Scarifying

 Using the scarifier drum, the device can be used as

scarifier to remove mats and mosses in the lawn and to cut

through wild growth with low roots.

To enable the growth of a healthy lawn in spring, the absorption

of water, air and nutrients in the root area needs to be

increased. We recommend scarifying the lawn in spring and

autumn.

To achieve good results and to extent the life of the scarifier

drum, the lawn should be mowed before scarifying (shorter than

4 cm).

L Do not scarify when the lawn has been freshly sown or

when it is wet or too dry.

Risk of injury by flying around objects.

Make sure that the impact guard is closed and the

collecting bag is attached.

• Place the scarifier at the edge of the lawn near the

receptacle.

• Move the cable after each turn to the opposite already

scarified side. Â

• Select the work depths according to the condition of the lawn

(see “Setting the work depth”).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atika VT36 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info