Bedienungsanleitung Atmos A25 (Seite 70 von 96) (Englisch)

810409

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

www.atmos.cz

70-EN

Operation and maintenance manual - EN

• Parameter S68 - characterizes function of R6 reserve output similar with S6 and S14 parameters

with instaled AC07X-C additional module. Primary is this reserve used to control electic valve for

pellet burner pneumatic ash cleaning system S68 = 16.

Function is only for DxxPX (PXxx) boilers

or burners equiped with additional AC07X-C module

burner profile A25PX (A25PX pneu)....... (0)

if:

a) S68 = 1…. If any fault occurs in the burner and the burner is shut down, the reserve relay will

be closed and the reserve output will be energized. Thanks to this you can start a spare source

of energy for heating of the building as e.g. a gas, electric or oil boiler.

b) S68 = 2….. If any fault occurs in the burner and the burner is shut down, the reserve relay will

be opened and the reserve output will not be energized. Thanks to this a signal can be sent to an

electrically backed up AB01 ATMOS GSM module controller that will send information that there

is a system fault or the system is not energized. This is the opposite logic (to S14 = 1), which

means that during normal operation the reserve is energized.

c) S68 = 3…… The reserve function as the output function for the burner fan, when the

reserve output is closed, is energized always when the burner fan is running (fan mode only

100 % or OFF). This function is applied if you want the boiler fan or extraction fan in the chimney

to run together with the burner fan. This function is designed for direct control of an fan directly

from the burner (e.g. DxxPX, PXxx).

d) S68 = 9… Reserve function as the output function for the external worm conveyor, when the

reserve copies the run of the external worm conveyor, but with the difference that it does not cycle,

but runs permanently both during the drawing of the ignition amount and during both the

times T4 and T6. Thus, the other external conveyor runs continuously and works independently

of the status of the actual output for the external worm conveyor. This means that if the output to

the main external conveyor from which pellets directly fall to the burner gets damaged, the reserve

will keep working independently. This function can be used in cases when you need to control

another external conveyor that supplies (feeds) pellets from a larger distance to a pellet bin at the

boiler from which the main external conveyor draws pellets to supply them directly to the burner.

Caution - the other external conveyor must always be controlled with an additional level sensor

(level meter) that will maintain the level of pellets in the pellet bin at the boiler.

e) S68 = 10….. Reserve function as the output function for the external worm conveyor, when

the reserve copies the run of the external worm conveyor, but with the difference that it does not

cycle, but runs permanently both during the drawing of the ignition amount and during

both the times T4 and T6. Thus, the other external conveyor runs continuously, but it works in

dependence on the status of the actual output for the external worm conveyor. This means that if

the output for the external conveyor from which pellets fall directly to the burner gets damaged,

the reserve will be switched off automatically. This function is convenient in cases when you

need to control another external conveyor that supplies (feeds) pellets from a larger distance to

a pellet bin at the boiler from which the main external conveyor draws pellets to supply them

directly to the burner. Caution - the other external conveyor must always be controlled with an

additional level sensor (level meter) that will maintain the level of pellets in the pellet bin at the

boiler. This is a similar function to S6 = 9, but with a higher degree of safety.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atmos A25 Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Atmos A25

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info