Bedienungsanleitung Atmos A85 (Seite 4 von 66) (Englisch)

810412

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

www.atmos.cz

4-EN

Operation and Maintenance Manual - EN

1. General information

WA R N I NG - Before starting the burner you must get thoroughly acquainted with all provisions

of this manual. The manufacturer is not liable for damages caused by operation, maintenance

or wrong setting of the power of the burner that will cause heat overloading of the burner.

Introduction

This manual is intended for all users and contains information necessary for the installation,

start-up, maintenance and safe operation of the burner.

We recommend you to pay great attention to the safety regulations. Interventions that require

removal of some parts should be carried out carefully by qualified authorized experts. Repairs and

settings that are not described in the manual should not be carried out at all.

Application

The burner is designed for ATMOS D80P, P80 special boilers.

Technical specifications

Name: ATMOS A85

Prescribed fuel: high-quality (white) wooden pellets with the diameter of 6 to 8 mm, length of 5 to

25 mm and calorific value of 16 - 19 MJ.kg-1

Nominal heat input of the burner: 89 kW

Minimum heat input of the burner: 27 kW

Maximum heating surface of the boiler that the burner may be installed in: 5 m2

Fuel bin: not part of the delivery - recomended volume 1000 l

Fuel feeding: with an external worm conveyor type DRA50 - not part of the delivery

Burner control: with an AC07X electronic control unit that controls the operation of the external

conveyor, two ignition spirals and the fan in accordance with requirements of the boiler and the

heating system. The electronic system is protected with the safety thermostat of the boiler, safety

thermostat at the pellet supply to the burner, the fan speed transducer and the flame sensing photocell.

The operation of the burner is indicated on the electronic control display.

Power supply: 230 V / 50 Hz

Maximum power input at the start with one ignition element: 490 W - normal setting

Maximum power input at the start with two ignition elements: 1052 W - special functions

Average power input at the nominal heat input operation: 72 W

Average power input at the minimum heat input operation: 43 W

Average heat input in the standby mode: 3.3 W

Prescribed fuse protection of the burner with the boiler: 6.3 A

Acoustic pressure level (noisiness): 59 dB

Burner weight: 46 kg

Burner dimensions, WxHxD: 37 x 59 x 89 cm

Minimum dimensions of the combustion chamber: diameter / width = 400 mm, length / depth = 400 mm

Minimum ashpan space of the boiler: must correspond to operation at the nominal output for at

least one week. (min. 6 l)

Minimum vacuum in the combustion chamber of the boiler: 2 Pa

Min. protection against inadvertent opening of the boiler chamber (door): with a safety screw

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atmos A85 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Atmos A85

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info