Bedienungsanleitung Atmos A85 (Seite 28 von 66) (Englisch)

810412

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

www.atmos.cz

28-EN

Operation and Maintenance Manual - EN

AD02 or AD03 module under the instrument hood of the boiler and connect it electrically

between the boiler terminal board and the extraction fan, see the wiring diagram.

This setting and connection with AD02 or AD03 module and special connector (jumper to main

switch) is standardly used for SP(X) boilers with the function for automatic start after wood

is burnt out activated (AUTOSTART – S34 = 1 or S34 = 2). Boiler exhaust fan is running

simultaneously with the pellet burner during the AUTOSTART function.

e) S6 = 5…… Reserve function as the output function for the Z1 ignition spiral when the reserve

copies the run of the ignition spiral.

f) S6 = 6….. Cleaning function of the combustion chamber or grill (flap). If the burner is in the

normal START, RUN and STOP mode, the output is not energized. The output is only energized

for the limited time T11, which continues immediately after the expiration of time T5 in the

STOP mode. It is not used with the A25 burner.

g) S6 = 7….. Reserve function as the output function for the external worm conveyor, when

the reserve copies the run of the external worm conveyor (cycles between time T4 and T6). The

reserve output work independently of the condition of the actual output for the external worm

conveyor. This means that if the standard output for the external conveyor gets damaged, the

reserve will work independently in accordance with the same program, and therefore it can be

used as a replacement for the damaged output.

h) S6 = 8….. Reserve function as the output function for the external worm conveyor, when

the reserve copies the run of the external worm conveyor (cycles between time T4 and T6). The

reserve works in dependence on the status of the actual output for the external worm conveyor.

This means that if the output for the external conveyor gets damaged, the reserve will be switched

off automatically. This function is suitable in situations when you need to control another external

conveyor that supplies (feeds) pellets from a larger distance to the main conveyor from which the

pellets fall directly to the burner.

i) S6 = 9….. Reserve function as the output function for the external worm conveyor, when the

reserve copies the run of the external worm conveyor, but with the difference that it does not cycle, but

runs permanently both during the drawing of the ignition amount and during both the times T4

and T6. Thus, the other external conveyor runs continuously and works independently of the status

of the actual output for the external worm conveyor. This means that if the output to the main external

conveyor from which pellets directly fall to the burner gets damaged, the reserve will keep working

independently. This function can be used in cases when you need to control another external conveyor

that supplies (feeds) pellets from a larger distance to a pellet bin at the boiler from which the main

external conveyor draws pellets to supply them directly to the burner. Caution - the other external

conveyor must always be controlled with an additional level sensor (level meter) that will maintain the

level of pellets in the pellet bin at the boiler.

j) S6 = 10….. Reserve function as the output function for the external worm conveyor, when

the reserve copies the run of the external worm conveyor, but with the difference that it does not

cycle, but runs permanently both during the drawing of the ignition amount and during

both the times T4 and T6. Thus, the other external conveyor runs continuously, but it works in

dependence on the status of the actual output for the external worm conveyor. This means that if

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atmos A85 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Atmos A85

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info