SDC12-31ACD01
ATMOS ACD01 – SERVICE MANUAL EN
12
4.2 Control keys
4.2.1 Rotary button (Press / Turn)
By pressing the rotary button once, you can:
• Confirm inputs/values
• Enter individual parameters
• Change the selection level in the menu
By prolonged pressing (approx. 3 sec.) of the rotary button, you can:
• Enter the menu
By turning the rotary button, you can:
• Change values (increase clockwise and decrease counter-clockwise)
• Browse in the menu/parameters
4.2.2 “Daytime room temperature” key
This key is used to set the room temperature in the automatic mode during the
heating cycle as well as in the PARTY a HEATING operation modes. If in the
SYSTEM menu value 1 of the MODE parameter is selected, the entered value is
identical for all the heating circuits. If in the SYSTEM menu the MODE parameter is
set to 2, you can enter values for each of the heating circuits individually.
NOTE The value entered this way is the starting point for individual temperature settings
during heating cycles in the time program menu. If this value differs from the set
value, it is modified as necessary in case of a subsequent temperature change.
Setting:
• Press the ”Daytime room temperature” key .
• Set the required room temperature value by turning the rotary button to the
required value.
• Confirm the set value either by pressing the “Daytime room temperature” key
or by pressing the rotary button
.
Default setting 20 °C
Setting range 5 ... 30 °C
4.2.2.1 Function of quick switching to the “PARTY” mode
By keeping the “DAYTIME TEMP.” key pressed for more than 3 sec. you will
switch the controller to the PARTY mode - see the operation modes 4.2.5.3.
4.2.3 “Night-time room temperature” key
This key is used to set the reduced temperature value in the automatic program
between heating cycles as well as during the ABSENCE and REDUCED operation
modes. If in the SYSTEM menu value 1 of the MODE parameter is selected, the
entered value is identical for all the heating circuits. If in the SYSTEM menu the
MODE parameter is set to 2, you can enter values for each of the heating circuits
individually.
Setting:
Press the “Night-time room temperature” key .
-
