Bedienungsanleitung ATN Aries MK410 Spartan (Seite 6 von 8) (Englisch)

580226

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

CLEANING THE EYEPIECE

You may need to clean the eyepiece of the riflescope from time to

time in order to guarantee top performance. When you receive your

riflescope you should check for dust on the eyepiece of the unit.

First you will need to remove the eyepiece. To do that you will need to

initially loosen the fixing screw that can be found on the base. Then

unscrew the eyepiece counter-clockwise to remove it.

NOTE: You do not have to remove the set screws completely, they are

very small and easy to misplace.

CAUTION: Use only Photographic lens cleaning tissue on these surfaces. Be careful not to

scratch or smudge any of these surfaces. When using compressed air to blow dust away, make

sure to avoid inverting the can while spraying. This can cause frozen propellant to exit the can,

which can cause serious problems with the glass and phosphor screen.

WARNINGS AND CAUTIONS

• Always remember to turn off the Aries scope when it is not in use. If you do not plan on

using your aries scope for a period of more than 10 days, you should remove the batteries.

• Keep lens cap/daylight filter on when not in use.

• Avoid contact with dust, steam, and gas.

• The Aries scope is not harmful to the user or the environment.

• Do not disassemble except to clean the front lens and the eyepiece: it will void your

warranty.

• Evaluate the scopes function by looking through it in a lit environment with the daylight filter

lens cap on. Never use in daylight without the daylight filter lens cap on. Do not surpass ten

minutes of testing.

• Never point the Aries scope at a bright light source. If the scope shuts off automatically

after directing it at a bright light source, turn the unit off and wait 1 - 2 minutes before turning

the unit back on.

• Adverse atmospheric conditions such as fog, smog, or haze and a lack of ambient light

(moon or starlight) may diminish the effective viewing distance. All technical data for this

unit was compiled in a controlled environment.

• If you use the rubber eyecaps for a long period of time, you may suffer skin inflammation. If

you develop any symptoms, consult a doctor immediately.

TROUBLESHOOTING

Q: Flashes, flickers, or clicking occur while operating

S: If it occurs within the first five minutes of inserting new batteries, it is normal and the

device will resume normal operation soon thereafter. If it occurs for more than 10 minutes,

contact your dealer or other authorized service representative for service instructions.

Q: Dark spots on screen.

S: This may be dust on the lens, please clean according to instructions. They may also be

Cosmetic blemishes in the intensifier tube which are a by-product of the manufacturing pro-

cess. This is normal and will not affect the life or performance of the unit.

Q: Image not clear.

S: Adjust focus ring. If problem persists, increase viewing distance.

Fixing screw

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATN Aries MK410 Spartan Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info