Bedienungsanleitung Atomos NinjaV (Seite 11 von 67) (Englisch)

769373

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

Atomos Ninja V – User Manual Edition 1: Aug 2021 9

1. Mic/Line in

A 3.5mm input jack is located under the power button. Channel selection

and volume for headphone monitoring is via the audio controls section,

accessible by touching the audio meters in the upper right side of the

touchscreen (monitoring mode) or in the bottom right of the screen

(homescreen mode).

2. Headphone/audio out

A 3.5mm headphone jack is located above the remote port. Channel

selection and volume for headphone monitoring is via the on-screen

audio controls section, accessible by touching the audio meters in the

upper right side of the touchscreen (monitoring mode) or in the bottom

right of the screen (homescreen mode).

When monitoring any channels please ensure that the headphone

selection is set to the stereo pair you’d like to monitor.

For more details refer to Audio in the Using the Ninja V section.

3. Remote/Calibration Port

The calibration 2.5mm jack on the right hand side (looking from the front),

allows for the connection of the Calibrite ColorChecker Display Pro /

Display Plus calibration device. The calibration unit utilizes the optional

USB to serial adaptor cable. For optimal calibration it is recommended

that your Ninja V is powered for 30 minutes prior to calibration. The latest

version of the Atomos Calibration software is available at www.atomos.

com/support

For remote operations, via this port, AtomOS supports both LANC in Sony

and Canon format. The Ninja V uses LANC Client so a LANC controller

mustrstbeattachedtoacameraandtheoutputtakenoutviaaYcable

to the Ninja V.

4. AtomXpansion Port

Enhance your Ninja V through the built-in modular AtomXpansion port.

Bi-directional high speed video, audio and power are available. Expansion

modules dock into the battery slot and can be stacked, passing power

and offer advanced connections and functions. www.atomos.com/

accessories

5. HDMI in

The video input is a full size HDMI 2.0a connection used to receive the

video. This connection also supports embedded audio and timecode if

your camera or device sends these out over HDMI. The image is both

displayed and recorded to the Atomos monitor/recorder storage media.

Embedded Audio: Most mirrorless cameras and camcorders send 2

channels of audio over HDMI but the Ninja V can record up to 8 channels

of digital audio embedded in the HDMI signal if supported.

6. HDMI Out

This is for connection to an external monitor or other device with an HDMI

input. It carries a loop-through of the incoming HDMI signal in record and

standby mode, and the playback signal when the Ninja V is in playback

mode. This output is 2.0a and can carry either a 4K or HD signal (with the

option to down convert the 4K input to HD).

Video Scale Convert: Video out also has the option for a downscale to

be applied allowing your 4K input to be converted to a 1080 HD output

for use with existing HD equipment. DCI signals with a 17:9 aspect ratio

have the option to be cropped to 16:9 to support a wider range of output

displays.

3D LUT Output

3D LUTs can be applied to the outputs of the Ninja V and LUTs can

also be selected to be applied to the outputs and routed out to other

equipment via the HDMI connections.

HDR Output

The Ninja V can read the incoming HDR information frame from

compatible cameras that indicates if a signal is HLG or PQ. You can set

the Ninja V to automatically detect this and loop this out. You can also

convert between a Log input to HDR display standards or between

HLG <> PQ, and Dolby. For more information refer to Understanding

HDR and Log in the Monitoring and Recording section.

5. Ninja V Connections

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atomos NinjaV Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Atomos NinjaV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info