Bedienungsanleitung Atomos NinjaV (Seite 44 von 67) (Englisch)

769373

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

Atomos Ninja V – User Manual Edition 1: Aug 2021 42

This menu allows you to display an input as a scaled

input overlay in the corner of the screen over the top of

any program output, so that they both appear on screen

at the same time. You can use this feature to present to

the camera, whilst showing the viewer another angle, a

presentation or pre-recorded content at the same time.

In order to see the PiP appear over another input, a

connected display in Program mode is required.

Picture in Picture On/Off

Enable/Disable the Picture in Picture function by tapping

the On/Off switch.

Opacity

Use the slider to adjust the opacity of the PiP input.

PiP Size

Allows you to select the size of the PiP effect by tapping

on one of the two preset sizes: small or large.

Set PiP Position

Adjust the position on screen for the picture in picture

effect to be displayed.

PiP Input

Select the input that will appear as a PiP over the input

that is live.

The system automatically disables PiP when it is

not required, such as in situations where you would

have a PiP image displayed over the same image.

The PiP is not recorded onto the SSD/HDD inserted

in the Ninja V during record mode. To record the

PiP, connect an external recorder to PGM Out of the

AtomX CAST

This menu allows you to customize your settings

for switching.

Switch With

Allows you to select the style of switching to use whilst

in the Switcher mode. Tapping Switch With or the F4

button, cycles between the options:

• One Touch

In this mode, a single touch on one of the inputs

on the Ninja display when in multiview mode, or

on one of the physical 1-4 buttons on the AtomX

CAST, will switch to the corresponding input

immediately. The input on screen will have a red

border around it and the corresponding button on

the CAST will turn red when selected, to indicate

that it is live. The F4 button will also be red in One

Touch mode.

• Two Touch

Two touch recording, follows the traditional

broadcast preview and program switching style,

which allows you to preview an input before

actually switching to it. Whilst in this mode, the

program feed on the Ninja V display will have a

red border and the corresponding input selection

button on the AtomX CAST will also be red.

Tapping on another input will place a green

preview border around the chosen input on the

display, and the corresponding input selection

button on the AtomX CAST will also be green. This

indicates that the input is being previewed as the

next source to cut to. The selected input will also

be displayed on a connected display that is in

preview mode.

A second tap on the same input on the display or

on the input selection button whilst they are green,

will cut to that input immediately. If you select

another input instead, that will cause that input to

be previewed instead. If you do not wish to switch

to the input being previewed, tap on the program

feed again on the Ninja V display or press the input

selection button that is red.

SwitcherPiP

8. Using the AtomX CAST

Picture in Picture (PiP) Switcher

PiP Switcher

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atomos NinjaV Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Atomos NinjaV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info