810499
33
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
33
After completing the protection function is the display automatically switched to the operating
mode.
4.11 INFORMATION ABOUT THE CURRENT OPERATION
The „ĸ“ button enables to enter into the menu „Options“. The first option – „Information“ –is
displayed immediately. By the „ĸ“ button it is possible to enter into the „Information“ menu and
to browse there by the „+” and „–” buttons.
The „ĸ“ button is used to exit from menu and then is the display automatically switched to the
operating mode. If no button is pressed for 30 minutes, the display automatically is switched to
the operating mode automatically.
If any fault occurs or the temperature rises extremely, the options menu closes automatically.
4.12 INFORMATION DISPLAYED:
Menu Submenu Indication
Information Boiler set
°C -- Indicates the adjusted temperature value in the boiler
Boiler temperature
°C ---.- Current value. Indicates the current boiler temperature.
Flue gas set
°C ---.- Indicates the adjusted flue gas temperature
Flue gas temperature
°C ---.- Indicates the current flue gas temperature
O
2
set
% --.-
Indicates the adjusted oxygen value in the flue gas.
O
2
% --.-
Indicates the current oxygen value in the flue gas.
CO
2
set
% --.-
Indicates the adjusted value of the CO
2
in the flue gas
CO
2
% --.-
Indicates the current value of the CO
2
Note: The fix value of the CO
2
for calculation is max. 20,3 %.
Suction fan
ON/OFF
Operating state of the fan
Circuit pump
ON/OFF
Operating state of the pump
Primary motor
% --.-
Position of the primary air flap
Secondary motor
% --.-
Position of the secondary air flap
Lambda
--.-
Ratio of air (current value) Note: The fix value of the CO
2
for calculation is
max. 20,3 %.
Efficiency
ETA – F (%) --.-
Grade of efficiency of burning – current value
Temperature of air for burning (35 °C)is used for calculation
Total temperature excess (%)
--.-
Total ratio of the temperature excess (%) during the total time of burning
(total of the operating hours)
Temperature excess–
10 loadings (%) --.- Ratio of the excessive temperature in (%) by the last 10 loadings.
Operating hours
H --.-
Operating hours of the boiler. After 60 000 hours is the counter deleted.
Software
--.--
Program version nr.
Serial number
---------
Serial or production number of the regulator.
Test o
f
device
Safety test
Setting
END
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ATTACK DPX wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ATTACK DPX

ATTACK DPX Zusatzinformation - Deutsch - 21 seiten

ATTACK DPX Bedienungsanleitung - Deutsch - 48 seiten

ATTACK DPX Zusatzinformation - Englisch - 21 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info