Bedienungsanleitung ATTACK Electric Easy (Seite 14 von 28) (Englisch)

810555

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

†ČSN 07 0240:1993 - Water and low pressure steam

requested (difference between the temperature of boiler boilers basic rules

when the boiler start to heat and the temperature

†ČSN 07 7401:1992 - Water and steam for heating

requested) setting only by an authorized service man!! energetic equipments

Notice: If you increase hysteresis you can reduce the

†ČSN 33 1310:1990 - Electrotechnical rules. Safety

number of cycles during relays switching on/off and rules for electric equipments used by person without

elongate their lifetime. electric qualification

†ČSN 33 2000 -… Electrotechnical rules.

E - Go back to the production setting

†ČSN 33 2130:1985 - Electrotechnical rules. Inside

†If you have set wrong parameters than it is possible for electrical distribution system.

you to go back to the production setting. Values of

†ČSN 33 2180:1980 - Electrotechnical rules, connection

parameters will be according below mentioned table: of electric appliances.

Going back to the production setting steps:

†ČSN EN 50110-1:2005 - Service and work with

† switch off the boiler by main switcher electrical appliances

†push in the same time the buttons †ČSN EN 55014:2001 -Electromagnetic compatibility

†switch on the boiler by main switcher in the same time requirements for home appliances, electric tools and

as you hold pushing the buttons till the similar appliances.

moment when on the display there is E lightingí E†ČSN EN 60335-1+A55:1997 - Safety of home electric

†release the buttons and now the boiler is set according appliances and for similar purposes.

to the production setting. †ČSN EN 61000 -…Electromagnetic compatibility

(EMC)

2.5. Breakdowns, defects †Law No. 22/1997 Technical requirements for

products

In case that the boiler is broken then on the display there †Government direction No. 178/1997 defined

is E blinking with the number of the breakdown. technical requirements for construction products +

List of breakdowns: enclosure No. 1 basic requirements.

†Notice No. 48/1982 basic requirements to assure

labour protection and safety of technical equipments

3.2 Placement of the boiler in the

room

Room where the boiler will be placed and mounted on

the wall has to be in accordance with normal

environment AA5/AB5 according to ČSN 33 2000 3.

It is not allowed for boilers to be installed in bathrooms,

wash rooms, shower rooms in place 0, 1, 2, 3 according

to the rule ČSN 33 2000-7-701.

Concerning fire protection and safety the rule ČSN 06

1008 is valid and there is stated minimal distance from

flammable objects.

We recommend enlarging these distances to have

Breakdown of the boiler has to be minimal space for easier service and manipulation:

repair only by professional person!

In case that you have a - 500 mm from the front side

defect/breakdown and it is necessary - 600 mm from the top

to repair it only by an authorized - 200 mm from the side

service man, don't try to repair the

boiler by yourself.

Attention There is threat of casualty 3.3 Mounting of the boiler on the

by electric current. wall

Mounting is carried out by 2 screws or hooks which the

3. Installation boiler is hanged on through 2 inlets with spacing of holes

3.1 Norms and regulations 280 mm on the frame of the boiler.

For safety operation, projection, mounting, operation

and service of boiler is valid below mentioned norms and 3.4 Electroinstallation

regulations: 3.4.1 Boiler connection to electric supply net

†ČSN 06 0310:2006 - Heating systems in buildings For boiler connection to electric supply net it is

projection and mounting. necessary for user to have a license from the local

†ČSN 06 0830:2006 - Heating systems in buildings energetic distribution organization. Boiler input is not

safety and protection equipment allowed to be bigger than the input stated in the license.

†ČSN 06 1008:1998 - Fire safety of heating appliances

breakdown

marking specification repair breakdown reset

Temperature of heating

water higher than 99° C,

or temperature sensor is

broken (for example short

Call your service man Automatically

circuit)

Overheated – the boiler

is out of operation

through the emergency

thermostat.

Remove the blocking of

Call your service man

the emergency

thermostat (it is

necessary to know the

cause of overheating)

Lost of pressure –

pressure of heating

Check the tightness of

system decreased

heating system and fulfill

water to have pressure Automatically

higher than 0,4 bar.

Disconnected or invalid

temperature sensor or

If temperature is not

temperature below 0° C

increasing, call your

service man.

Automatically

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATTACK Electric Easy Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info