810507
31
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
29
2 Boiler settings
2.1 Preset boiler temperature
2.2 Weather control the boiler
Boiler temperature calculation according to the heating curve and outdoor
temperature sensor data during active equithermal operation.
2.3 Boiler heating curve
The heating curve takes into account the thermal parameters of the building.
Recommended boiler settings are: 1.8 - 4.
2.4 Curve shift
Allows correction - increase / decrease of temperature in a regulated heating circuit
with equithermal control switched on, when the heating curve does not fully
correspond to the characteristics of the building.
2.5 Pellet feeder settings - Output modulation
2.5.1 Limitation of max. boiler output
Limitation of maximum boiler output.
2.5.2 Energy density - Fuel calorific value
2.5.3 Fuel feeder performance
2.5.4 Feeding correction
Percentage of administration correction
2.5.5 Fan correction
2.5.6 Feeder efficiency test
2.5.6.1 Performance test time
Length of the feeder performance test. At the end of this time, weigh the fuel fed and
enter the value on the panel (net pellet weight).
2.5.6.2 Efficiency test time
Feeder efficiency test.
2.5.6.3 Fuel weight
Enter the weighed weight of the pellets in grams.
2.6 Fuel level
2.6.1 Alarm level
Amount of fuel at which the message appears: MINIMUM FUEL!
2.6.2. Fuel level calibration
Parameters for fuel quantity calibration. First of all, it is necessary to fill the tank and
select 100% FUEL. If a minimum amount of fuel remains in the tank after a certain period
of boiler operation, it is necessary to select FUEL QUANTITY 0%.
2.6.2.1 Fuel level 100%
2.6.2.2 Fuel level 0%
2.7 Burner cleaning - Maximum operating time
It is the time of continuous operation of the burner, after which the automatic switch-
off occurs, cleaned and again after the burner burns, if the conditions for re-operation
are met.
2.8 Cleaning schedule - Exchanger cleaning interval
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ATTACK Pellet 30 Automatic Plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ATTACK Pellet 30 Automatic Plus

ATTACK Pellet 30 Automatic Plus Bedienungsanleitung - Deutsch - 56 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info