810507
47
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
45
BACKUP BOILER CONECTION
The controller can control the operation of the backup boiler (gas or oil). In this case, it is
not necessary to switch this boiler on or off manually. The backup boiler will be switched
on in case the temperature of the pellet boiler drops below the set temperature in the
service menu. The backup boiler is switched off when the pellet boiler reaches the required
temperature. Connection to a backup - e.g. gas boiler must be performed by a qualified
technician in accordance with the technical documentation of this boiler. The backup
boiler must be connected to terminals 46-47 via a relay.
Example of a system diagram for connecting a backup boiler to the controller, 1 -
controller, 2 - backup boiler (gas or oil), 3 - relays RM 84-2012-35-1006 and base GZT80
RELPOL.
To enable backup boiler control, set H outputs for backup boiler control in the menu:
Service settings ĺ Output H ĺ Backup boiler
ĺ Boiler settings ĺ Replacement boiler
To additionally enable backup boiler control, you must set the Backup boiler shutdown
temperature parameter to a value other than zero. The switch-off of the backup boiler
control follows the setting of the zero value of the switch-off of this parameter.
The control output for the backup boiler is also shared with the alarm
output. Disabling the backup boiler control will cause the output to be
controlled by the alarm module.
If the pellet boiler is in operation and its temperature exceeds the set value - e.g. 25 ° C, the
controller switches off the backup boiler (supply voltage 12V at terminals 46-47). This will
power the relay coil and open the contacts. When the boiler temperature falls below the
set value of the backup boiler switch-off, the controller stops supplying voltage to
terminals 46-47, which switches on the backup boiler.
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ATTACK Pellet 30 Automatic Plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ATTACK Pellet 30 Automatic Plus

ATTACK Pellet 30 Automatic Plus Bedienungsanleitung - Deutsch - 56 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info