Bedienungsanleitung Audi Connect 2015 (Seite 8 von 24) (Englisch)

618597

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Audi connect (infotainment) services on myAudi

►

Select your SD card as the storage location

when requested to do so by the Audi connect

download client.

The download is started and the download status

is displayed.

The selected files are automatically loaded onto

your SD card.

►

After downloading, remove the SD card from

your computer's slot or your card reader.

Note

– Please use the suggested Java application

program to open the Audi connect down-

load client. It does not need to be saved.

– Your vehicle is equipped with the latest

maps at the time of delivery.

– You can also have the new map data instal-

led by an Audi dealer (there would be a

charge for this service).

Importing map update into the MMI

►

Insert the SD card with the update files into

one of the MMI's SD card slots.

Select the following on the MMI:

►

button > Setup MMI > System update.

Or:

►

button > Settings > left control button

> System maintenance > System update.

►

Select and confirm the source (SD1 or SD2).

►

Select and confirm Start update.

The data in the navigation system will then be

updated; the status of the update procedure will

be shown on the infotainment display.

You can continue using the navigation system

while the update is being performed.

►

To complete installation of the new maps, con-

firm the update.

Your MMI will be restarted. If route guidance was

active, the navigation system will be briefly inter-

rupted and will then automatically resume oper-

ation after the MMI is restarted. The updated

maps can now be used for navigation.

Note

– The update procedure on the MMI may take

up to two hours, depending on which map

update is selected. The update is interrup-

ted if the engine is switched off, for exam-

ple, but automatically resumes at the same

point when the vehicle is restarted.

– To ensure that the maps are updated cor-

rectly, the SD card should not be removed

from the slot during a map update.

–

When imported, the new map package over-

writes the map package stored on the MMI.

–

The speech dialogue system is not available

while a map update is taking place.

myAudi special

destinations

Before you start

You can search for your own special destinations

(points of interest) on the Internet and transfer

them to the MMI using an SD card.

You can compile a selection of destination lists

on your computer from various Internet sources.

Using the Audi connect service myAudi special

destinations, you can convert the destination

lists stored on your computer into a combined

database and import them into the MMI using an

SD card.

The individual destination lists can be identified

on the MMI according to the names/categories

you allocate to them and can be used separately.

You can also assign a particular symbol to each

destination list to make them easier to identify

on the map.

Requirements

– There must be a formatted SD card with at

least 2GB of memory space in your (comput-

er's) card reader.

– There should be no other files on the SD card.

File formats

A destination list can be created using files in the

following formats:

– .csv 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audi Connect 2015 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Audi Connect 2015

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info