Bedienungsanleitung Audio-Technica ATH-ANC100BT (Seite 3 von 17) (Englisch)

704596

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

Safety precautions

Cautions for rechargeable battery

The product is equipped with a rechargeable battery (lithium polymer battery).

• If battery fluid gets into eyes, do not rub them. Rinse thoroughly

with clean water such as tap water and consult a doctor

immediately.

• If battery fluid leaks, do not touch fluid with bare hands. If fluid

remains inside the product, it may cause malfunction. If battery

fluid leaks, contact your local Audio-Technica dealer.

– If fluid gets in your mouth, gargle thoroughly with clean water

such as tap water and consult a doctor immediately.

– If your skin or clothing comes in contact with fluid,

immediately wash the affected skin or clothing with water. If

you experience skin irritation, consult a doctor.

• To avoid leakage, generation of heat or explosion:

– Never heat, disassemble or modify the battery, nor dispose of

it in a fire.

– Do not attempt to pierce with a nail, hit with a hammer or

step on the battery.

– Do not drop the product or subject it to strong impact.

– Do not get the battery wet.

• Do not use, leave or store the battery in the following places:

– Area exposed to direct sunlight or high temperatures and

humidity

– Inside of a car under the blazing sun

– Near heat sources such as heat registers

• Charge only with the included USB cable to avoid malfunction

or fire.

• The internal rechargeable battery of this product cannot be

replaced by the user. The battery may have reached the end of

its service life if the usage time becomes significantly shorter

even after the battery has been fully charged. If this is the case,

the battery needs to be repaired. Contact your local

Audio-Technica dealer for repair details.

• When the product is disposed of, the built-in rechargeable

battery needs to be discarded properly. Contact your local

Audio-Technica dealer to learn how to properly dispose of the

battery.

For customers in the USA

FCC Notice

Warning

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this

device must accept any interference received, including

interference that may cause undesired operation.

Caution

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority

to operate this equipment.

Note: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment to an outlet on a circuit different from

that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for

help.

RF Exposure Statement

This transmitter must not be co-located or operated in

conjunction with any other antenna or transmitter used in

other systems. This device complies with FCC radiation

exposure limits set forth for an uncontrolled environment and

meets the FCC radio frequency (RF) Exposure Guidelines.

This equipment has very low levels of RF energy that is

deemed to comply without testing of specific absorption rate

(SAR).

For customers in Canada

IC statement

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada's licence-exempt

RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and (2) This

device must accept any interference, including interference

that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter

may only operate using an antenna of a type and maximum

(or lesser) gain approved for the transmitter by Industry

Canada. To reduce potential radio interference to other users,

the antenna type and its gain should be so chosen that the

equivalent isotropically radiated power (e.i.r.p.) is not more

than that necessary for successful communication.

This device complies with RSS-102 radiation exposure limits

set forth for an uncontrolled environment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audio-Technica ATH-ANC100BT Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Audio-Technica ATH-ANC100BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info