Bedienungsanleitung Audioline Baby Care 5 Twin (Seite 25 von 36) (Deutsch, Englisch)

500952

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

− Operation −

Service−Hotline Germany: Tel. 0180 5 001388, cost via German landline at time of going to print: 14 ct/min.,

different costs possible via mobile telephone systems

5 Operation

Once you have set up your Baby Monitor, you will be able to hear the sounds in your baby´s room

through the Parent Unit. You will also be able to see those sounds as green and red sound sensor

lights around the top of the Parent Unit, which rise and fall with the volume level − the more lights, the

louder the noise, with the red lights being the loudest.

If the connection between the Parent Unit and Baby Unit is broken at any time the green Link"

light on the Parent Unit will flash and the green and red sensor lights will cease to react to any

sounds. To re−establish the Link", follow the directions in the Troubleshooting" chapter.

Volume

You can adjust the volume at which you hear your baby by using the Up/Down Keys on the side of

the Parent Unit. This will not effect the sensitivity of your Baby Monitor, only the volume at which you

hear those sounds through the Parent Unit.

Battery Charge indicator and battery low warning

The Parent Unit will work up to 10 hours out of the Charger Pod, but this depends on the level of

charge in the batteries. The charge level is indicated by the battery icon on the Display. If the charge

becomes low, a battery low warning beep" will sound and the battery icon on the Parent Unit´s

Display will begin to flash. If this occurs you should return the Parent Unit to the Charger Pod to

re−charge the batteries. You can still use your Parent Unit from the Charger Pod.

Language

Your Baby Monitor can be set to Display its information in different languages.

To change the language

At the Parent Unit

1. Press the Menu Key, then use the Up/Down Keys to scroll to [Language]. Press the OK Key.

2. The Display shows [ENGLISH]. Use the Up/Down Keys to scroll to your chosen language. Press

the OK Key. The Display briefly shows [Saved] and your chosen language will now be set.

Clock

You can set the Display of the Parent Unit to show the current day and time. This can be shown as

either the 24 or 12 hour clock (your monitor is pre−set to show the 24 hour clock). You will need to set

the clock if you wish to use the Feed Timer feature.

If you have unplugged your Baby Monitor from the power supply, you will need to reset the

Clock the next time you use it.

To set the time

At the Parent Unit

1. Press the Menu Key then use the Up/Down Keys to scroll to [Clock]. Press the OK Key.

2. Display shows [Set time]. Press the OK Key.

3. Display shows [Year]. Use the Up/Down Keys to scroll to the correct year. Press the OK Key.

4. Display shows [Month]. Use the Up/Down Keys to scroll to the correct month. Press the

OK Key.

5. Display shows [Day]. Use the Up/Down Keys to scroll to the correct day. Press the OK Key.

6. Display shows [Hour]. Use the Up/Down Keys to scroll to the correct hour using the 24 hour

clock. Press the OK Key.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audioline Baby Care 5 Twin Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info