501326
66
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
- Multiple handsets -
66
9.4.3 Logging on a handset to another DECT/GAP base station system or a third
party base station
1. Prepare other base station
Follow the operating instructions indicated under 'Logging on additional handsets' of the
base station you would like to log on to.
2. Logging on the DECT8049 handset
Proceed as described above from point 2., but use the PIN code of the base station you
would like to log on to (instead of 0 0 0 0).
9.4.4 Logging off handsets
A handset can only be logged off using another handset that is still logged-on. It is therefore
not possible to carry out the logging-off procedure using the handset that is to be logged off.
1. Press the Menu display button on the mobile unit.
2. Select the Registration menu with and and confirm with OK.
3. Select the De-register menu with and and confirm with OK.
4. Now enter the PIN code of the base station (factory setting 0 0 0 0) and confirm with
OK.
5. Now select with and the number 1, 2, 3, 4 or 5 of the mobile unit to be
logged off and confirm with the OK button. You can abort the process by pressing
the button. If the logging-off is successful, after a few seconds you will hear a
signal tone. The mobile unit is now logged off and can no longer be used for
external and internal calls.
9.5 Additional base stations
You can increase the range of the handsets by using several base stations. In order to
make use of this effect, all base stations must be connected to a telephone socket.
Depending upon the application, you can allocate the same telephone number to each base
station or you can give the base stations different numbers. Make sure that the ranges of all
base stations overlap. Each handset must be logging on to each basis station. Please test
the range of the handsets before putting a new base station into operation.
If a handset is logged on to the base station and if the automatic base station selection is
activated (further information in this chapter), the handset is always forwarded automatically
to the nearest base station. Current calls cannot be transferred from one base station to
another.
66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Audioline DECT8049 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info