501427
37
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
- Special functions -
37
6.6 Working with more than one base station
A number of base stations can be used to extend the coverage available to the
handsets. To make use of this effect, all the base stations must have a
telephone connection. Depending on your objectives, you can provide each
base station with its own telephone line or connect them all to the same line.
A new number will be allocated to the handset each time that it moves within
range of another base station.
You should ensure that the coverages of the base stations overlap. Before
adding a new base station to your system, check the range of the handsets.
If a handset is registered with the base station and automatic base station
selection is switched on (further information in this chapter), the handset will
be automatically handed on to the next base station. Calls in progress cannot
be passed from one base station to another.
Logging the handset on to an additional base station
1. Look in the operating instruction manual for your existing telephone to
see how you set up the base station for logging on new handsets. When
you have carried out the necessary steps, continue from point 2.
2. Press the button on the handset.
3. Press the buttons * and # on the handset, one after the other.
4. Now enter the base station number using the number pad. If you want to
log your telephone on to a second base station, press the number 2.
5. Now enter the PIN code for the base station.
6. Now press the button and after a few seconds you will hear a signal
tone. The handset is now logged on to the selected base station.
7. The handset will now automatically be assigned an internal call number.
The main handset already logged on has the internal number 1. All
further handsets are numbered in the order that they are logged on
(internal call numbers 2 to 5). You can check these internal call numbers
at any time. For more information, see Item 6.5.
37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Audioline MiniDECT 5000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info