Bedienungsanleitung Audioline OSLO 583 (Seite 38 von 64) (Deutsch, Englisch)

501390

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

− Telephoning −

5.1 Taking a call

{ì} and {í},  Take the call

 End the call

When the handset is ringing, press the y or z button to adjust the ringing vo-

lume.

If the ringing tone has been deactivated on the handset, incoming calls are only indica-

ted by the base station (as long as the base ringer has not been deactivated).

5.2 Handsfree

Use this function to telephone with your hands free.

 Switch the function on or off

5.3 Taking two calls

You will hear acoustic signals (call waiting) if a second call is received while you are talking on the

telephone. The number of the second caller appears in the display. Press the buttons below in

the sequence described to switch between the two callers, the connection to the other caller is

put on hold.

R, 2 Switch to the other caller

Caution: The functions for phone number display, holding calls and call waiting are

supplementary services offered by your telephone network provider. Contact your net-

work provider for further information.

5.4 Making a call

ë Enter the phone number (max. 32 digits)

 Dial the phone number

If you enter a wrong digit:

 Press briefly: Deletes the last entry.

2 sec  Press longer: Deletes the entire phone number.

It is also possible to press the Call button  first to obtain the dialling tone for an outside line.

Then enter the required telephone number. It is not possible to correct wrong digits individually

using this dialling procedure.

5.5 Dialling pause

In the case of private branch exchanges, it is necessary to dial a specific number (e.g. 9" or 0")

in order to obtain the dialling tone for an outside line. When using some older private branch ex-

changes, it takes a little time before the dialling tone becomes audible. Particularly in the case of

such private branch exchanges, it is useful to insert an automatic pause after the number for the

outside line so that the number can be dialled in a continuous process without having to wait for

the dialling tone.

Between pressing the number for an outside line and the phone number required, press the £

button once. P" appears in the display. After dialling the number for the outside line, the telephone

then waits 3 seconds before dialling the actual phone number.

The pause can also be entered with the phone number in the phone book.

5.6 Redialling

The telephone stores the last ten numbers dialled in a redialling list.

£ Open the redialling list (the last phone number dialled

appears in the display)

y or z,  Select an entry and dial the number

If a phone number has been stored in the phone book, the name associated with it ap-

pears in the display.

5.6.1 Deleting all the numbers from the redialling list

£ Open the redialling list

2 sec ,  Delete the entire list

5.6.2 Deleting a number from the redialling list

£, y or z Select the entry to be deleted

,  Delete the individual entry

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audioline OSLO 583 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Audioline OSLO 583

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info