619882
34
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
23
24
25
Answering Machine
34
Recording/Controlling/Deleting outgoing messages
Recording an outgoing message
The outgoing message recorded can be maximally 40 seconds long.
2 sec A Activate Setting mode
Press and hold x Start recording (OGM 1)
Release x End recording (OGM 1)
Press and hold u Start recording (OGM 2)
Release u End recording (OGM 2)
Checking the current outgoing message
A Play the outgoing message
Deleting your own outgoing message and reverting to the default message
After deleting your own outgoing message, the default, pre−recorded message is automatically reactivated.
A Play the outgoing message
Press during playback to delete the outgoing message
Recording a memo
A memo is an internal message which can be played as a normal incoming message.
Recording the memo
A memo cannot be longer than 2 minutes.
Press and hold x Start recording
Release x End recording
Playing/Deleting recorded messages/memos
Playing messages / memos
The recorded messages/memos are played back in the sequence they were recorded. The weekday and
time of recording are announced before the respective message or memo is played back.
2 sec q Play new messages / memos
q Play all messages / memos
s Stop playback
x Repeat playback of message
u Skip to next message
Deleting a message / memo
q Play the message / memo to be deleted
Press during playback to delete the message / memo
Deleting all messages / memos
All the messages / memos are deleted. This means that new messages / memos are also deleted. Play all
the messages / memos. After having played all the messages / memos you can delete them.
q Play all messages / memos
Delete all the messages / memos
Remote access
You can call your answering machine to listen to any messages left and carry out other functions. A condi-
tion for this is the use of a telephone which implements tone dialling mode.
Security code for remote access
To be able to use the remote access function, you must enter a security code. The default security code set
at the factory is 000".
2 sec Activate Setting mode
x or u, Enter the 1st digit and confirm
x or u, Enter the 2nd digit and confirm
x or u, Enter the 3rd digit and confirm
34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Audioline Oslo 880 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Audioline Oslo 880

Audioline Oslo 880 Bedienungsanleitung - Holländisch - 28 seiten

Audioline Oslo 880 Bedienungsanleitung - Französisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info