Bedienungsanleitung Audioline SHADOW 558X (Seite 40 von 56) (Deutsch, Englisch)

501406

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Answering Machine

The volume can be switched off for the call screening of incoming mess-

ages: 0 = muted, 7 = loud. Press the Plus or Minus button to adjust the vol-

ume.

Setting the number of rings (answering delay)

You can select from 2; 4, 6, 8 ringing tones or the Tollsaver ("Zeitsparer")

setting for pre−remote access free of charge. The toll−saving pre−remote

access feature can be used to check whether new messages have been

received on your answering machine from a distant telephone.

S If your call is taken after 2 rings, there are new messages on the

answering machine.

S If no messages have been recorded, the call is taken after 6 rings.

Therefore, replace the receiver before the 6th ring. This means that

no charges will be incurred.

 Open the main menu

: or ;

,  Open the submenu

: or ;

2,  Select the number of rings and confirm

After selecting the tollsaver function,

appears in the display. The

function is referred to as Zeitsparer" in the vocal operator guidance.

Further information on remote access is provided on . Page 42.

Message waiting indicator

If new messages/memos have been recorded on the answering machine

which have not yet been played, the display flashes. The display also indi-

cates how many new messages have been recorded but not yet played .

Call screening

You can listen−in to the message being recorded without actually taking

the call. Volume 1 to 7 must be set in this case. . Page 13

In order not to hear incoming messages as they are being recorded, set

the volume to 0 (muted). . Page 13

Taking calls already answered by the TAM

It is possible to take a call even if the answering machine has already

begun to take it. Recording of the message is stopped in this case.

 Take the call

Selecting the answering mode

The answering machine can be operated in Answer−Record mode or

Answer Only mode. When Answer−Record mode is activated, it is poss-

ible for callers to leave a message, in Answer Only mode they cannot.

When the answering machine’s memory is full, it automatically switches to

Answer Only mode.

,

Ao ,  Activate TAM settings mode

: or ;

,  Activate Answer Only mode

: or ;

OF ,  Switch Answer Only mode off thereby

activating Answer−Record mode

If Answer Only mode is activated,

oo appears in the display. If Answer−

Record mode is active, the number of new messages/memos appears.

Recording/Controlling/Deleting outgoing messages

The answering machine is provided with two, pre−recorded outgoing

messages: Outgoing message 1 (OGM 1) is played in Answer−Record

mode, outgoing message 2 (OGM 2) in Answer Only mode. Both pre−re-

corded outgoing messages can be replaced by ones of your own.

Recording outgoing messages

An outgoing message may be up to 60 seconds long.

Firstly, select the answering mode for which you want to record a mess-

age. . Section Selecting the answering mode".

, @

Activate TAM settings mode

ð,  Speak the outgoing message into the

microphone and confirm it

Playing the outgoing message currently set

OGM 1 or 2 is played back

Press the Stop button to stop playback before it has finished.

Service−Hotline Germany: Tel. 0180 5 001388 (cost via Telekom at time of going to print: 12 ct/min)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audioline SHADOW 558X Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info