501038
56
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
- Programming -
56
Your TERMINAL 2 is preset to the German language in the factory. If you want to change over
to English, please proceed as follows:
1. Press the MENUE button.
2. Press the
button as many times as necessary until the message "SERVICE" appears
in the display.
3. Press the OK button. The message "Pin Code >>" will appear in the display.
4. Now enter the five-digit PIN code using the keypad (factory setting 0 0 0 0 0) and confirm
the entry with OK. The message "MSN ?" will appear in the display.
5. Now press the
button as many times as necessary until the message "Sprache
?/Language ?" appears in the display.
6. Confirm with the OK button. The message "ENGLISCH ?" will appear in the display.
7. Now choose between the two languages "DEUTSCH" and "ENGLISCH" using the
and
buttons.
8. Confirm with OK and the selected language will be set.
9. You can exit programming with the MENUE button.
5.8 Room monitoring
You can also listen in to your home or office using your TERMINAL 2. To do this, it will be
necessary to programme MSN 3 with the associated phone number (see 3.9, "Assigning MSN
phone numbers") If room monitoring is switched on, you can then listen in to the room from an
external connection using the phone number MSN3. If you want to use room monitoring, you
should not pass on your MSN3 phone number to other people.
1. Press the MENUE button.
2. Press the
button as many times as necessary until the message "SERVICE"
appears in the display.
3. Press the OK button. The message "Pin Code >>" will appear in the display.
4. Now enter the five-digit PIN code using the keypad (factory setting 0 0 0 0 0) and
confirm the entry with OK. The message "MSN ?" will appear in the display.
5. Now press the
button as many times as necessary until the message "Baby
Sitting ?" appears in the display and confirm with OK.
6. Select the required setting "Baby Sit Enable ?" or "Baby Sit Disable ?" with the
or
buttons.
7. Confirm the entry with the OK button and the message "Baby Sitting ?" will appear in
the display once more.
8. You can exit programming with the MENUE button.
56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Audioline TERMINAL 2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info