Bedienungsanleitung Audiosonic CD-1593 (Seite 5 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

545645

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

• When all the desired tracks have been programmed, press the “PLAY / PAUSE”

button to play the disc in the order you have programmed.

• Press the “STOP” button twice to terminate programmed playback.

Mode

Press the “MODE” button during playing CD / MP3 disc, each press switches the

mode function as follows:

• Repeat 1

• Repeat album ( *mp3 only )

• Repeat all

• Random

• Normal playback

USB operation

• Plug your USB device into the port.

• Press the "FUNCTION" button to select “CD” mode.

• If there is no disc on the disc tray. It will read and play automatic your USB device.

• If There is a disc on the disc tray. It will read and play automatic your DISC,

• Press and hold the “PLAY / PAUSE” button for a few seconds to entry USB mode

when playing CD.

• Playback will start automatically from the first track and the display will show “USB”.

• Press the “STOP” button when you're finished.

Programme mode

The programme mode works the same as the CD / MP3 programme mode.

Aux in

• Connect an external audio source to the device by plugging it in the aux in jack.

• Press the power button to turn on the device.

• Use the native controls on the external audio source to start playing music.

Clock setting

• Press and hold the “ST / FUNC” button to switch unit in the standby mode.

• Press and hold the “SLEEP / TIME SET” button to entry the clock set mode. The

display will show “24H” and is flashing.

• Adjust the time format (12H / 24H) by pressing the “SKIP +” or “SKIP -” button.

• Press the “SLEEP / TIME SET” button to confirm the time format, the display will

show “AM 12:00” if 12H format is set or “0:00” if 24H is set.

• Adjust the hour by pressing the “SKIP +” or “SKIP -” button, press the “SLEEP / TIME

SET” button to confirm.

• Adjust the minutes by pressing the “SKIP +” or “SKIP -” button, press the “SLEEP /

TIME SET” button to confirm.

• Notes: Because the clock setting is at standby mode, the display is dim.

Alarm setting

• Alarm setting must be after completed clock setting.

• Press and hold the “ST / FUNC” button to switch unit at standby mode.

• Press the “VOL + / AL 1” or “VOL - / AL 2” button to entry alarm set mode.

• Adjust hour by pressing the “SKIP +” or “SKIP -” button, press the “VOL + / AL 1” or

“VOL - / AL 2” button to confirm.

• Adjust minute by pressing the “SKIP +” or “SKIP -” button, press the “VOL + / AL 1”

or “VOL - / AL 2” button to confirm.

• Pressing the “SKIP +” or “SKIP -” button to select

BUZZ

RADIO

USB

• Press the “VOL + / AL 1” or “VOL - / AL 2” button to confirm.

• Adjust alarm volume by pressing the “SKIP +” or “SKIP -” button, press the “VOL + /

AL 1” or “VOL - / AL 2” button to confirm.

• After confirm the alarm volume, the display will automatically scan your setting

one time.

• The display will show “1” or “2”. Alarm seting is now complete.

• Press the “VOL + / AL 1” or “VOL - / AL 2” button to activate the alarm on / off function.

• Note: If you need to reset the alarm, press and hold the “VOL + / AL 1” or “VOL - /

AL 2” button for 3 seconds to re-entry the alarm set mode.

Instruction Manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audiosonic CD-1593 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info