Bedienungsanleitung Audiosonic RD-8520 (Seite 8 von 116) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

658116

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Alarm

• There are three independent alarms - 2 alarms of an absolute time setting (Alarm

1 and Alarm 2) and 1 alarm for a relative time setting (Alarm NAP). Press Alarm on

the remote control to enter this menu directly.

• The first two alarms are similar to the normal alarm. Turn on the radio, then set the

time and set it alarms every day, once or every specific day of the week. Choose

Sound to set the sound to Beep, Melody or Radio.

• Note that the alarm source is from the preset Internet radio station if the Alarm

Sound is set to be Radio. It can only set one same IR/FM station for Alarm 1 and

Alarm 2. When it reaches the alarm time, the unit connects to the

• Internet if the default network is available. Therefore there may be some short

delay for the radio alarm to go of.

• If no network is connection in one minute, the alarm will change to Melody

automatically.

• After Alarm NAP is set, it will go off once in 5/10/20/30/60/90/120 minutes

depending on which choice you have set. You may choose Alarm Volume to

configure the volume of the alarms.

• When the alarm(s) is/are set, there will be a clock icon at the top of the display.

The clock icon with alarm time will also clearly display on the standby mode screen.

• During the alarm you can enter the snooze mode by pressing snooze. The alarm

will go of again in 5 minutes. Press other keys to stop the alarm.

Language

Select the OSD language: English, German, Spanish, French, Portuguese, Italian

Dimmer

Configure the brightness of the backlight on the display.

• Select Standby to set the brightness of backlight in standby mode, and select

Active to set the brightness in operation mode.

• Choose Dimmer Timer to set the duration of the radio backlight when you are not

controlling it.

Power Management

• Configure to go to standby mode automatically when in the menu or/and without

Wifi signal.

• Choose the power management timer (5/15/30mins) to set the duration of the

radio to switch standby mode automatically when you are not controlling it.

• Choose “Turn off” to ignore the power management function.

Sleep Timer

Turn off or set the sleep time of 15/30/60/90/120/150/180 minutes. Once the time

is set, there will be a bed icon with remaining minutes at the top right corner and

device will go to standby in the chosen time-period. Press Sleep on the remote

control as a shortcut of this function.

Buffer

Configure the buffer time of the music playback, 2/4/8 seconds.

Weather

• The device is able to display current weather information in the standby mode.

Turn on Standby Display and set the temperature unit (

C or

F) to get the weather

displayed in the standby mode.

• When it is turned on, the current time and the current weather will display in

alternative 10 seconds.

Instruction Manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audiosonic RD-8520 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info