Bedienungsanleitung Audiosonic SCZT2 (Seite 29 von 32) (Englisch)

618699

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

VQT2R71

Maintenance

Unplug the AC mains lead from the household mains socket and wipe the system using a soft and dry cloth.

• When the system is very dirty, wring the cloth soaked in water thoroughly, wipe the dirt and wipe moisture off with a dry cloth.

• Do not use solvents such as benzine, thinner, alcohol, etc. because they may cause casing to deform and coating to come off.

• Before using chemically treated cloth, read the instructions that come with the cloth carefully.

Digital audio signals supported by this system

 Dolby Digital

Blu-ray disc, DVD etc.

 DTS

Blu-ray disc, DVD etc.

 PCM (2-channel)

CD, DVD audio etc.

 Multi-channel LPCM (Linear PCM)

Blu-ray disc, DVD audio etc.

 This system supports 3D, x.v.Colour or

Deep Colour.

Troubleshooting guide/Digital audio signals supported by this system/Maintenance

• With HDMI connection, this system can play back multi-channel LPCM signals

with sampling frequencies of over 48 kHz and PCM signals of over 96 kHz in

addition to multi-channel LPCM of up to 48 kHz and PCM of up to 96 kHz. (If

frequency exceeds these figures, playback equipment performs down-sampling

and plays back as 48 kHz signals. However, playback may be impossible

depending on the discs. See operating instructions of playback equipment for

more information.)

• With the optical fibre connection, this system can play multi-channel LPCM

signals with sampling frequencies of up to 48 kHz and PCM signals of up to

96 kHz.

• See “Glossary” (➜ page 30) for more detailed information on each signal.

Note

Troubleshooting and

other information

Problem Possible solution Pages

VIERA Link

“HDAVI Control” does

not function properly.

• Confirm “VIERA Link “HDAVI Control” setting” is set to “ON ” (when the

operation is linked).

When it is “OFF ”, change to “ON ”.

•

VIERA Link “HDAVI Control” does not function in standby condition (HDMI off mode)

when this system is turned off. See “Reducing standby power consumption (In standby

condition (HDMI off mode))” and set to “ON ” (normal power consumption).

• Check VIERA Link “HDAVI Control” settings of the connected equipment.

• VIERA Link “HDAVI Control” may not function when you change the

connections for HDMI equipment, insert and remove the outlet, or during

blackout. Do the following operations in this case.

– Turn on the TV (VIERA) again while all the equipment connected with HDMI

cables is on.

– Set “VIERA Link “HDAVI Control” (HDMI equipment control)” of TV (VIERA)

to “OFF” and then set to “ON” again. (For details, refer to the operating

instructions for TV (VIERA).)

–

Connect this system to TV (VIERA) using the HDMI cable, switch the TV (VIERA) on,

unplug this system’s AC mains lead, and insert it into a household mains socket.

—

Even if multi-channel audio

sources, such as DVD, Blu-

ray disc, are played back,

“ DIGITAL” or “DTS” is not

displayed.

• When using VIERA Link “HDAVI Control” and the speaker is set to “TV”, press

VIERA Link button on the remote control of TV (VIERA) and set the speaker to

“Home Cinema”.

This system’s input automatically

switches to “AUX2 / STB ”, but

sound is not heard.

Or unexpected sound from other

equipment is heard.

• After “Setting for automatically switching the input source to STB”, the

connection might have been changed. Select “OFF ” once and “SET ” again.

[WIRELESS LINK]

indicator on the speakers

does not light green.

Sounds are interrupted.

• When [WIRELESS LINK] indicator is off, check the connection of AC mains

lead of speaker and check the speaker is “ON”.

•

If [WIRELESS LINK] indicator does not change from red to green, the main unit and speaker are

not linked. Make sure that the main unit is “ON”. Or make the speaker setting again.

•

You may be using wireless headphones or the wireless LAN may be operating near this

system. These symptoms may be remedied by slightly moving this system’s position.

14,15,17

15,17

—

Sound stops.

(The indicator blinks red

and green alternately.)

The protection circuit is activated

when some abnormality is

detected, and turns off the

system automatically.

• Amplifier output is abnormal.

• Straining of the speakers through excessive volume or power.

• This may occur if you use the system in an extremely hot environment.

 Determine and correct the cause, then turn the system on.

(The protection circuit is reset.)

(Consult your dealer if the problem persists.)

—

HDMISpeakers

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audiosonic SCZT2 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Audiosonic SCZT2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info