Bedienungsanleitung Audiosonic TL-3497 (Seite 4 von 136) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

526939

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

POWER BUTTON USAGE

Turn On:

Press and hold the power button for 3 seconds.

Turn Off:

Press and hold the power button for 3 seconds, → tap Power off → tap OK.

Screen lock and Unlock:

Press the power button quickly to lock or unlock the screen.

Force Shutdown:

When the device isn’t responding, press and hold the power button for 7 seconds.

(Note: If it is not necessary, we don’t suggest to use Force Shutdown. You should

follow the Turn Off steps to perform the shutdown. (Force shutdown may lead to

unpredictable system errors)

RESET:

Press the Reset key to reset the device. Pressing reset will make the device reboot,

which effect is equivalent to a force shutdown.

TOUCH-SCREEN NAVIGATION

The touch-screen allows for a quick, easy and convenient navigation experience.

You can use the touch-screen as followed:

Tap:

Quick tap & release on an item on the screen.

Finger slide:

Touch & slide your finger across the screen and then release.

Touch & hold:

Touch and hold your finger in one place for approximately 2 seconds, then release

the screen to display an options window.

• To avoid scratching or crushing, do not place objects on top of the touch screen

surface.

USING MICRO SD CARD

• The device supports micro SD card’s with a maximum capacity of 32GB.

• Insert your micro SD card into the micro SD card slot until it clicks into place.

Removing micro SD Card:

Close all applications and files that have been opened from the SD card. Tap →

Settings → Storage → Uninstall SD card. Slightly press down on the SD card; it will

partially ejected, allowing you to pull the SD card out.

• Don’t insert and remove the SD card repeatedly in a short time, as this may cause

damage to the card.

• We recommend using major brands of memory cards to avoid incompatibility.

GETTING STARTED

Charging the device

• You can charge the battery by using the included adapter.

• You can also charge the device by connecting the supplied USB cable to a power

supply.

• You can use the device while the battery is charging, although the charging time

will increase when you’re operating and charging at the same time.

• Plug the AC adapter into an power outlet and connect the other end to the

devices DC interface to charge the battery. ( Fully charged in about 5 hours).

Turn the device on:

Press and hold the power button for 3 seconds.

Wi-Fi Network Setup:

Since many features and applications require a Wi-Fi connection, we recommend

you to configure a Wi-Fi connection at this point.

Tap , → Settings, → Wireless & network.

1. If Wi-Fi is turned “off”, tap “on” to turn Wi-Fi on.

2 . The device automatically scans and displays all locally detected Wi-Fi Networks.

A indicates a secure network, that requires a login name and password to connect.

3. Tap the network to which you want to connect, → if applicable, enter the login

Instruction Manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audiosonic TL-3497 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info