Bedienungsanleitung Audiosonic TXCD-1530 (Seite 7 von 112) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

483849

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

CONNECTION OF SPEAKER BOXES

• Unwrap the speaker-cords of both speaker-boxes.

• Please notice that each speakers cord consists of 2 wires, one is "clear" and one has

a black line.

• Insert the "clear" wire of the left speaker-box into the "red" ( + ) speaker connector

beside the main-unit, which has the "L" indication (next to the speaker-connector).

• Insert the "black" wire of the left speaker-box into the "black" ( - ) speaker

connector beside the main-unit, which has the "L" indication (next to the speaker-

connector).

• Repeat the above 2 steps for the "right" speaker box, but this time, inserting them into

the red & black connectors which have the "R" indication.

• When inserting each wire into a connector, press downwards on the connector's

plastic knob (red or black part) & push the exposed metal end of the wire all the

way into the hole above this knob.

• Place the speaker boxes as far apart as possible for best sound eﬀect.

DIGITAL CLOCK FUNCTION

How to set correct time:

• The set has a built-in digital clock, which is displayed when the unit is in "standby

mode" or when you press & hold program key for two seconds during cd or radio

operation.

To set the correct time, follow this procedure:

1. Switch unit to "stand-by" mode (display light = oﬀ)

2. Press & hold program for 2 seconds

3. Display shows hour or hour (ﬂashing)

4. Press next or back to select 12-hour or 24-hour clock display system & press

program to conﬁrm your selection

5. Press next or back repeatedly to set the correct hour in the display & press

program to conﬁrm

6. Press next or back repeatedly to set the correct minute in the display & press

program to conﬁrm

7. Correct time is now set & will be shown in the display!

AUTOMATIC POWER ON/OFF TIMER FUNCTION

This set has a timer function to enable you to program the unit to automatically

switch “ON” or “OFF” at preset times. this is useful as a morning alarm clock :

How to set timer

1. Press and hold timer key. the on symbol appears in the display.

2. Press next or back to adjust the hour of the desired "power on" time and then

press timer to conﬁrm.

3. Press next or back to adjust the minutes of the desired "power on" time and then

press timer to conﬁrm. now the symbol in the display changes to show oﬀ .

4. Press next or back to adjust the hour of the desired "power oﬀ" time and then

press timer to conﬁrm.

5. Press next or back to adjust the minutes of the desired "power oﬀ" time and then

press timer to conﬁrm. now the display will indicate the "wake up mode" (cd or

radio).

6. Press next to choose the desired mode & press timer to conﬁrm

7. The display then shows the "wake up volume level" (loundness). press back or next to

decrease or increase the volume level to be used for the music to be played when the

timer switches on the unit at the pre-set time.

8. Press timer to conﬁrm. the unit will then automatically display all your settings in

sequence:

• "power on time" ( ON )

• "power oﬀ time" ( OFF )

• "power on mode" (cd or tuner)

• "power on volume level" (loudness)

Instruction Manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audiosonic TXCD-1530 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info