Subject to technical changes
Using the Cosmetic Trim Ring
1. Install the sleeve.
a. Install adapter if necessary (optional).
b. Install sleeve into adapter or dashboard (use only the supplied screws). Do not force the sleeve into the opening or cause it to bend or bow.
c. Locate the series of bend-tabs along the top, bottom and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard ope
ning, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.
2.Use the M5 x 6 screws (provided) to install the mounting brackets to each side of the radio using the holes indicated below.
3. Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve.
CAUTION! Be careful not to damage the car wiring.
4. Complete wiring as illustrated in the wiring diagram on page 8. Once the wiring is complete, reconnect the battery negative terminal. If there is
no ACC available, connect the ACC lead to the power supply with a switch.
6
