Bedienungsanleitung Audisse Netbox (Seite 16 von 92) (Englisch)

742551

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

1 6 / 0 2 / 2 0 1 7

Main menu

Internet radio

Spotify Connect

Music player

DAB radio

FM radio

14:35

Please wait

Connecting.

Network settings

Please wait

Connecting.

Key:

Press SELECT to exit

Setup wizard

completed

Setup wizard

17. To enter the WEP or WPA key, characters are selected and entered using the

Tuning

ControlRotary

. The highlight scrolls through the available characters as well as the three

controls on the right. The character currently highlighted will be entered when you press

the

TuningControlRotary

. Do this as needed until the complete key has been entered.

Remember, WEP keys only use the numbers 0-9 and letters A-F. WPA keys are sensitive to

upper and lower case characters. You must enter the key exactly or the radio will not connect

to the network. The three controls on the right-hand side of the screen have special functions.

You can quickly access these by pressing the

Infobutton

and then use the

TuningControl

Rotary

and

Selectbutton

as needed:

select ‘ ’ to erase a character just entered

select ‘ ’ when the complete key has been entered

select ‘ ’ to cancel an re-run the Network Wizard

If a WEP or WPA key has previously been entered for the selected SSID then the display

will show ‘Key: [Set]’. If you have previously entered a different key, you must clear this by

selecting the ‘ ’ symbol. This will remove the ‘[Set]’ indication.

 AfterthenalcharacteroftheWEPorWPAkeyhasbeenentered,highlightthe‘ ’ symbol

and press the

TuningControlRotary

. Then screen will show ‘Connecting…’ and then ‘Setup

wizard completed’. Press the

TuningControlRotary

to exit setup wizard. The radio should

now be able to connect to the network.

18. Once you have connected your radio to the network (and therefore also to the Internet) it will

display the main menu. Press the

Powerbutton

to put the radio in Standby mode.

It should then display the time as obtained from the Internet. If the time display is not correct

for any reason, it can easily be adjusted later, see ‘Manually setting the clock’. The clock

display will switch off after about 30 seconds if the radio is running on batteries.

If you have followed the steps on the preceding pages successfully, your radio will have

connected to your router, and then made a connection to the Internet and set its clock. If this

is the case, then you can try listening to radio stations via the Internet.

 Note:

The clock display in Standby mode is only maintained when the radio is powered

from the mains. If you are powering the radio from batteries, then the clock display will be

switched off after about 30 seconds and the radio will shut down completely in order to

minimize battery usage. The clock will be set to the current time the next time that you switch

on the radio, depending upon the clock update settings.

Importantnote:

In Standby mode the alarm function can only be used when the radio is

operated on AC power. In Standby mode on battery power the radio will turn off fully after 30

seconds (battery power save mode) and will not be turned on by the alarm function/settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Audisse Netbox Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info