777442
35
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
35
EN
The system can detect and read the le under MP3 format only at USB
mode but not other music le format.
If connect the system to MP3 player via the USB socket, due to
variances in le system format, some MP3 player may not be able to
play via the USB socket. This is not a malfunction of the system.
USB port does not support connection with USB extension cable and is
not designed for communication with computer directly
Due to ErP stage two requirement and protect the environment(for
European market only). The unit will switch to standby mode
automatically once no any music playing over 15 minutes.
Removing of USB
To remove the USB turn o the power or switch the function mode to either
cd or tuner mode rst. For USB port – un-plug it by
pulling out the USB socket directly.
BT CONNECTING AND PLAYBACK
1. Press the Function button (15) to select “ BT / AUX ” mode.
2. If the Aux-in jack is not connected, the system will switch to BT mode
automatically and “ BT “ with ashing of “Pairing” will be shown on the
LCD display (1). It means the BT in non connection / searching mode.
3. Switch on the BT feature of your BT device (such as mobile phone) and
select “ Goldsound ” BT equipment to connecting.
4. Once the connecting was nish and connect successfully, the LCD
display (1) will show “ BT Connected “.
5. Start to playback your BT device and enjoy the music by the main unit.
6. Adjust the Volume Up/Down button (3) to desired volume level.
7. To disconnect the BT connection, turn o the BT feature of your BT
device. The LCD display will show “ BT “ with ashing of “Pairing” for
pairing of new device or switch o the unit.
MORE FEATURES
Sleep function
1. Press “ Sleep ” button (on Remote) “SLP-90 “ will shown on the LCD
display (1).
2. Keep pressing the button to adjust the sleep timer in the order of 90 >
80 > 70 >….10 minutes respectively and sleep icon “zZZ ” will indicate on
LCD.
3. System will stop and go to standby mode automatically after running
the selected time.
4. To cancel the sleep mode, press “ Sleep ” button until “SLP-o’ displayed
and the “ “ indicator disappear on LCD display.
35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Auna 10031894 KR-400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info