705648
26
Zoom out
Zoom in
Vorherige Seite
1/37
Nächste Seite
http://www.auna-multimedia.com
multimedia
1. Press MENU button > Main menu > System settings > Factory Reset, press SCROLL/SELECT knob
to conrm.
2. Turn SCROLL/SELECT knob to select ‘YES’, and then press SCROLL/SELECT knob to conrm.
Software Update
From time to time, your radio may make software upgrades available with bug xes and/or additional features. If your
radio detects that newer software is available, it will ask if you want to go ahead with an update. If you agree, the new
software is then downloaded and installed. After a software upgrade, all user settings are maintained.
C A U T I O N
Before starting a software upgrade, ensure that your radio is plugged into a stable mains power connection.
Disconnecting power during a software update may permanently damage the unit.
1. Press MENU button > Main menu > System settings > Software update, press SCROLL/SELECT
knob to conrm.
2. Turn SCROLL/SELECT knob to select ‚Auto-check setting‘, your radio will check periodically for
new version software.
3. Turn SCROLL/SELECT knob to select ‚Check now‘, your radio will now to check new version
software and automatically upgrade to new software.
Setup Wizard
When this unit is started for the rst time, it runs through a setup wizard to congure settings for date/time and net-
work. Once this has nished, the system is ready to use in most modes.
1. Press MENU button > Main menu > System settings > Setup wizard, press SCROLL/SELECT knob
to conrm.
2. Turn SCROLL/SELECT knob to select ‚YES‘, and then press SCROLL/SELECT knob to conrm.
Viewing System Info
This information may be requested when dealing with technical support issues.
1. Press MENU button > Main menu > System settings > Info, press SCROLL/SELECT knob to
conrm.
2. Turn SCROLL/SELECT knob to view ‚SW version‘, ‚Radio ID‘ and ‚Friendly Name‘.
Setting Backlight
1. Press MENU button > Main menu > System settings > Backlight, press SCROLL/SELECT knob to
conrm.
2. Turn SCROLL/SELECT knob to select ‘Power-on Level‘ or ‚Standby Level‘, then press SCROLL/
SELECT knob to conrm.
3. Turn SCROLL/SELECT knob to select backlight level, and then press SCROLL/SELECT knob to
conrm the setting.
Power-on Level
High
Low
Standby Level
High
Low
O
26
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Auna Weimar - 10026419 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info