Bedienungsanleitung Auriol 2-LD4617-7 (Seite 8 von 35) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

734174

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

Important safety information for users

WARNING! RISK OF INJURY!

This device may be used by persons (including children over 8 years of

age) with reduced physical, sensory or mental abilities or lack of

experience and knowledge, if they are supervised or instructed regarding

the safe use of the device and understand the dangers that may arise.

Children may not play with the device. Cleaning and user maintenance of

the device may not be performed by children without supervision. Keep

packaging films out of the hands of children. There is a danger of

suffocation.

Important safety information for the batteries

WARNING!

HEALTH HAZARD!

RISK OF EXPLOSION!

Keep batteries out of reach of small children. If a battery is swallowed, you

must seek medical attention immediately. Batteries/rechargeable batteries

must always be inserted in the correct polarity. If necessary, clean the

battery and device contacts. Never attempt to recharge non-rechargeable

batteries. Never short-circuit or attempt to open batteries. Never throw

batteries into fire as they may explode. If the device will not be used for an

extended time period, remove the battery and store the device in a dry and

dust-free area. Improper use of the battery can lead to explosion or

leakage. If the battery leaks, avoid contact with skin, eyes and mucous

membranes. Use gloves. If you are exposed to battery acid, rinse the

affected areas with plenty of clean water and immediately seek medical

attention. Remove discharged batteries from the device as they present an

increased risk of leakage.

Time setting

Carefully pull the crown out all the way. Turn the crown clockwise or

counter clockwise to set the time. Press the crown back to the case to

complete the setting.

Band shortening instruction for model

2-LD4617-2

Band shortening can be accomplished by removing links. Open the band

clasp safety and open the clasp. The band is held to the clasp by a spring

bar. Image 1. Compress and remove the spring bar by using a pointed

tool. Now place the watch face down on a soft surface. Image 2. The

links that can be removed are marked with an arrow. Image 3. Place the

band in the band changing tool in such a way that the pointed end of the

tool points directly at the metal rod. Turn the screw in the direction of the

arrow until the metal rod is pushed out a small distance. The rod can now

be pulled out (using pliers if necessary). The strap can now be taken

disassembled. Remove as many links as necessary using this method.

Reinsert the rod in the opposite direction of the arrow and push it back into

the band. The strap and clasp can now be reassembled.

A replacement tip for the tool is included in the bottom of the tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Auriol 2-LD4617-7 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info