793237
15
Zoom out
Zoom in
Vorherige Seite
1/177
Nächste Seite
-
13
-
Get sensor data
The weather station regularly receives the data from the sensors. If the
data reception fails, you may carry out a data update directly by
pressing and holding the ROOM 1, 2 or 3 button 30. If reception is
successful, the signal reception symbol 17 appears in the display.
Naming the sensors
The sensors can be placed in different rooms or outdoors. It is possible
to assign a name to each sensor on the radio controlled weather
station at 16. For example, a sensor placed in the bathroom could be
named BATH. When setting the names it is possible to select one of the
pre-set names: BATH, BEDRM, KID1, KID2, YARD. It is also possible to
enter custom names with up to 5 characters each.
Setting pre-set names
\
Room 1
Room 2
Room 3
Room 4
Room 5
DE
BAD BETT KIND1 KIND2 GARTN
GB
BATH BEDRM KID1 KID2 YARD
FR
BAIN SOMML
ENF1 ENF2 JARDN
IT
BAGNO
SONNO
BAMB1 BAMB2 GIARD
ES
BANO DORMI NINO1 NINO2 JARDN
DK
BADEV SOEVN BARN1 BARN2 HAVE
SE
BADRM SOEMN
BARN1 BARN2 TRADG
To select a name for sensor 1, press the 1-ROOM-button 30. Press the
1-ROOM-button 30 again to view the different pre-set names. If you
wish to select one of the names, wait for 5 seconds until the selected
name no longer blinks. The name is now set. Select the names for the
other rooms in the same way.
Setting custom names
Custom names can also be set for the sensors. Up to 5 custom names
can be set. When a sixth name is set, the first stored name will by
overwritten automatically. To set a custom name, the letters A-Z, the
special characters , , , , , , , and the numbers 0-9 are
available.
To set a custom name for Sensor 1, please proceed as follows: Press
the 1-ROOM-button 30 and then immediately press the up-button
25. Press the up-button 25 or the down-button 26 to select a
character. When the desired character appears, press the 1-ROOM-
button 30 to confirm your setting and move to the next character of 5
possible characters in the name. It is possible to delete characters by
pressing the SET-button 32. Once 5 characters have been entered the
display will automatically return to normal time display mode. If you
have entered less than 5 characters, press the 1-ROOM-button 30 2x
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Auriol 4-LD5641 - IAN 354196 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info