Bedienungsanleitung Auriol IAN 1143533 - 15-01-BS (Seite 9 von 40) (Holländisch, Schwedisch, Finnisch)

692995

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

9 GB/IE

Note: During the visual alarm lead time a ﬂashing

will appear in the LC-display

. With the visual alarm

going oﬀ at the same time as the acoustic alarm, the

symbol will be static.

Switching oﬀ the alarm

If no button is pressed after the alarm automatically activates,

the alarm will automatically switch oﬀ after one hour and

will only reactivate the next time the alarm time occurs.

When the alarm sounds, you can switch it oﬀ with the

SNOOZE button

When using the snooze function, the alarm will sound again

in 10 minutes. To completely switch oﬀ the alarm with the

snooze function activated, hold the SNOOZE button for

3 seconds or press the ALARM button

once.

The alarm will then remain oﬀ until the next alarm time reoccurs.

Note: In clock mode, press the ALARM button

once to

quickly switch between the „Alarm on“ / „Alarm on with

snooze“ / „Alarm oﬀ“.

Set radio

Station scan

The radio will receive FM stations at frequencies between

87.5 MHz to 108 MHz via the cable aerial

. To scan for

stations proceed as described below:

Press the RADIO button

. The light alarm clock is now

in radio mode. The frequency

will be displayed.

Hold the + button

or the − button

for 3 seconds.

The radio will start scanning for stations. The station

scan will stop on the ﬁrst station found.

When pressing the + button or the − button for 3 sec-

onds again, the radio will continue scanning stations.

The VOL+ button

increases the volume.

The VOL– button

lowers the volume.

Aim the cable aerial

so the radio has optimal

reception.

Press the RADIO button for the light alarm clock to

return from radio mode to clock mode.

Save station

With the light alarm clock in radio mode there are

8 memory locations for saving stations.

Hold the RADIO button

for 3 seconds until a station

you found has been saved. The display will ﬂash the

memory location suggested by the radio.

Press the VOL+ button

or VOL− button

to select

the memory location you wish to use. Press the RADIO

button to conﬁrm your selection.

To recall a saved station repeatedly press the TEST but-

ton

with the light alarm clock in radio mode until the

desired memory location appears in the LC-display.

When switching the radio oﬀ by pressing the RADIO

button, the radio will play the last station selected when

turned back on.

Rapid Test

Note: The light alarm clock must be in clock mode for the

rapid test.

Press the TEST button

. The light alarm clock will scan

the settings for the selected alarms. The advance alarm

will not be run. Instead, the light will be adjusted to the

set value, then the alarm will sound.

Lighting

Press the SNOOZE button

. A white guide light will

appear in the illuminated panel

Press the SNOOZE button again to switch the light oﬀ

again.

The visual alarm will also work when the light is on. The light

will then be deactivated and will reappear after the alarm.

Mood light

The mood light function activates a dim coloured light in the

illuminated panel

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Auriol IAN 1143533 - 15-01-BS Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Auriol IAN 1143533 - 15-01-BS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info