Bedienungsanleitung Aurum MONTAN VII (Seite 3 von 21) (Deutsch, Englisch, Französisch, Spanisch)

491319

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

ENGLISH

Setting up

As a rule you should try various set-up positions in order to get the best sound

results.

Since the positioning of loudspeakers decisively influences the quality of the sound

they deliver, we’ll start by giving you some hints on how and where to set your

AURUM units up.

Placing the speakers near the corners of the room will essentially give you loud

bass reproduction but with little outline. On the other hand, speakers positioned well

away from the walls sound precise, but also very bright and thin. The best solution is

to place the speakers with a clearance of at least 30 cm between their backs and

the nearest wall. To avoid loud wall reflections, the distance from the side walls of the

room can even be 50 cm or more.

As far as possible, the speakers should be equidistant from the listening position, while

the distance of the speakers from each other can be rather less than the distance

from the listener.

Positioning your speakers on hard floor surfaces

If your AURUM floorstanding speakers are going to be placed on a hard floor

surface, for instance on tiles, stone, parquet or laminate, we urgently recommend

that you fit the supplied rubber mats in place under the cabinet base. These mats

will protect your speakers as well as the floor from damage while compensating

any slightly uneven spots. However, you will not need to use them where soft

floor surfaces such as carpets are concerned since the aluminium discs pre-fitted

between the cabinet and base already serve the purposes of acoustic decoupling.

When fitting the rubber mats (S) onto the speaker base you will need a helper as

well as the cardboard angle strip that you will find in the speaker

packaging. We recommend doing so on each of the speakers

as follows:

• Firstly, determine where you definitively wish to position the

speaker in the listening area and have the angle strip and

rubber mat ready to hand.

• Your helper should now tilt the cabinet slightly to one side

so that you can slide the angle strip one centimetre (at the

most!) under the raised edge of the cabinet base.

• Your helper should now tilt the cabinet slightly to the other

side and hold it in this tilted position while you fit the rubber

mat precisely into place under the raised base; when doing

• At high volumes, voltage levels of 30–50 V can be present at speaker terminals

and components. Be very careful not to touch uninsulated terminal contacts of

speakers when in operation. To avoid injury, never put hands or arms into sound

outlets (bass reflex tubes). Children and pets, in particular, are at risk from this.

• For safety reasons, we generally forbid the opening of loudspeaker cabinets

when in operation or connected since, as explained in the above paragraph,

voltages of up to 50 volts can be present inside.

• Improper handling of mains voltage can cause fatal injury!

Passive loudspeakers must on no account be connected to the electricity

supply!

Speaker terminals may only be connected to the appropriate output terminals

of the amplifier. You should never connect these terminals to the electricity supply

(230 V/115 V) in any way since that will otherwise also immediately destroy the

loudspeaker and all connected products. Avoid fitting plugs to ends of speaker

cables that could even remotely be confused with mains supply plugs.

• Loudspeakers that are not magnetically shielded can affect the colour of the

TV picture or cause distortion. A distance of 50 cm is generally sufficient to avoid

problems of this kind. Avoid placing items such as credit cards, diskettes, audio or

video cassettes or other magnetic media on the loudspeaker. This could destroy

the information stored on them. Similarly, avoid operating magnetic tape devices

in the immediate vicinity.

(W )

BDA AURUM 22.08.06.indd 4-5 19.09.2006 12:07:52 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aurum MONTAN VII Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info